EN 12882:2008

Conveyor belts for general purpose use - Electrical and flammability safety requirements

This European Standard specifies electrical and flammability safety requirements for general purpose conveyor belts not intended for use in underground installations and a means of categorizing conveyor belts in terms of the level of safety sought in their end use application. This European Standard does not provide electrical safety requirements for volume resistance which may be measured by the methods in
EN ISO 21178 and which is relevant to some types of light conveyor belts.
This European Standard is not applicable to conveyor belts which are manufactured before the date of publication of this document by CEN.
NOTE 1   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC, this being covered in EN 14973.
NOTE 2   EN 12882 is not a product standard but is intended to help users of conveyor belts to select the required electrical and flammability safety properties needed following a suitable risk assessment. No requirements are, therefore, included for marking, information to be supplied, etc., these matters being covered in relevant product standards such as EN ISO 14890 and EN ISO 15236-1.

Fördergurte für allgemeine Anwendung - Elektrische und brandtechnische Sicherheitsanforderungen

Diese Europäische Norm legt elektrische und brandtechnische Anforderungen an Fördergurte für allgemeine Anwendung fest, die nicht für den Einsatz unter Tage vorgesehen sind, sowie die Klassifizierung von Fördergurten hinsichtlich des für den Verwendungszweck angestrebten Sicherheitsgrads. In dieser Europä-ischen Norm sind keine Sicherheitsanforderungen an den elektrischen Durchgangswiderstand festgelegt, der mit den in EN ISO 21178 genannten Verfahren gemessen werden kann und der für einige Typen leichter Fördergurte von Bedeutung ist.
Diese Europäische Norm gilt nicht für Fördergurte, die vor dem Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.
ANMERKUNG 1   Richtlinie 94/9/EG, die Einrichtungen und Schutzsysteme für den Einsatz in potentiell explosiven Atmosphären betrifft, kann für den Maschinentyp oder Einrichtungen zutreffen, die durch diese Europäische Norm abge¬deckt sind. Die vorliegende Norm soll nicht zur Erfüllung der wesentlichen Gesundheits- und Sicherheits-anforderungen der Richtlinie 94/9/EG dienen, die durch EN 14973 abgedeckt ist.
ANMERKUNG 2   EN 12882 ist keine Produktnorm, sondern dazu gedacht, den Anwendern von Fördergurten bei der Auswahl der erforderlichen elektrischen und brandtechnischen sicherheitsrelevanten Eigenschaften zu helfen, die auf-grund einer angemessenen Risikobeurteilung notwendig sind. Deshalb sind keine Anforderungen an Kennzeichnung, bereitzustellende Angaben usw. enthalten, da diese Themen durch die entsprechenden Produktnormen wie beispiels-weise EN ISO 14890 und EN ISO 15236 1 abgedeckt sind.

Courroies transporteuses à usage général - Prescriptions de sécurité électrique et protection contre l'inflammabilité

La présente Norme européenne spécifie les exigences de sécurité électrique et les exigences en matière de
protection contre l’inflammabilité relatives aux courroies transporteuses à usage général qui ne sont pas
destinées à être utilisées dans des installations souterraines, ainsi qu’une méthode de classement des
courroies transporteuses en termes de niveau de sécurité recherché lors de l’application finale. La présente
Norme européenne ne fournit pas d’exigences de sécurité électrique pour la résistance transversale qui peut
être mesurée selon les méthodes de l’EN ISO 21178 et qui concerne certains types de courroies
transporteuses légères.
La présente Norme européenne ne s’applique pas aux courroies transporteuses fabriquées avant la date de
publication du présent document par le CEN.
NOTE 1 La Directive 94/9/CE concernant les appareils et les systèmes de protection destinés à être utilisés en
atmosphères potentiellement explosibles peut être applicable au type de machine ou d’appareil couvert par la présente
Norme européenne. La présente norme n’est pas destinée à fournir un moyen de se conformer aux exigences
essentielles en matière de santé et de sécurité de la Directive 94/9/CE, cet aspect étant traité dans l’EN 14973.
NOTE 2 L’EN 12882 n'est pas une norme de produit mais est prévue pour aider les utilisateurs de courroies
transporteuses à choisir les propriétés de sécurité électrique et d'inflammabilité requises après une évaluation appropriée
des risques. Aucune exigence n'est donc incluse pour le marquage, l'information à fournir, etc., ces sujets étant couverts
par les normes de produit pertinentes telles que l’EN ISO 14890 et l’EN ISO 15236-1.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev za splošne namene - Električne in požarnovarnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2008
• Withdrawal Date: 04-Aug-2015
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 3 - Safety requirements for conveyor belting
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-Aug-2015
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: SIST EN 12882:2008 - Conveyor belts for general purpose use - Electrical and flammability safety requirements

Relations

• Replaces: EN 12882:2001 - Conveyor belts for general purpose use - Electrical and flammability safety requirements
• Effective Date: 22-Dec-2008
• Replaced By: EN 12882:2015 - Conveyor belts for general purpose use - Electrical and flammability safety requirements
• Effective Date: 12-Aug-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fördergurte für allgemeine Anwendung - Elektrische und brandtechnische SicherheitsanforderungenCourroies transporteuses a usage général - Prescriptions de sécurité électrique et protection contre l'inflammabilitéConveyor belts for general purpose use - Electrical and flammability safety requirements53.040.20Deli za transporterjeComponents for conveyors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN 12882:2008SIST EN 12882:2008en,fr01-december-2008SIST EN 12882:2008SLOVENSKI
STANDARDSIST EN 12882:20021DGRPHãþD



SIST EN 12882:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12882October 2008ICS 53.040.20Supersedes EN 12882:2001
English VersionConveyor belts for general purpose use - Electrical andflammability safety requirementsCourroies transporteuses à usage général - Prescriptionsde sécurité électrique et protection contre l'inflammabilitéFördergurte für allgemeine Anwendung - Elektrische undbrandtechnische SicherheitsanforderungenThis European Standard was approved by CEN on 24 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12882:2008: ESIST EN 12882:2008



EN 12882:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Safety requirements.6 5 Safety categories.7 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.13 Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC.14 Bibliography.15
SIST EN 12882:2008



EN 12882:2008 (E) 3 Foreword This document (EN 12882:2008) has been prepared by Technical Committee CEN/TC 188 “Conveyor belts”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12882:2001. This document has been prepared u
...