EN 13418:2004

Rubber and plastics machines - Winding machines for film or sheet - Safety requirements

This European Standard specifies the safety requirements for the design and construction of winding, unwinding and rewinding machines for film or sheet manufactured from rubber, plastics and composite materials in respect of the significant hazards listed in clause 4.
A winding machine begins at the intake of the film or sheet into the winding machine and ends at the discharge position of the reel(s).
An unwinding machine begins at the take-up position of the reel(s) and ends at the film or sheet take-off point.
A rewinding machine begins at the take-up position of the reel(s) and ends at the discharge position of the reel(s).
In some machines the winding, unwinding and rewinding functions may be combined.
The following functional groups are covered by this European Standard:
- fixed point roll;
- film or sheet tension control;
- winding zone;
- reel change device;
- reel loading and unloading devices;
and the following additional equipment integrated into the winding machine:
- spreader roll device;
- longitudinal cutting unit;
- slitting device;
- film or sheet alignment device;
- static eliminator.
Technical safety requirements for the design and construction of aids for lifting and handling, e.g. of winding cores or reels, are not covered by this standard.
Technical safety requirements for the design and construction of thickness monitoring devices are not covered by this standard.
Hazards due to electro-magnetic radiation, e.g. from the use of thickness monitoring devices, are not covered by this standard.
Toxic or chemical hazards and hazards due to dusts, fumes or gases, which could occur from the materials being wound are not covered by this standard.
NOTE   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essen

Gummi- und Kunststoffmaschinen - Wickelmaschinen für flache Bahnen - Sicherheitsanforderungen

Diese Europäische Norm enthält die sicherheitstechnischen Anforderungen für Konzipierung und Bau von Wickelmaschinen zum Auf- und Abwickeln von flachen Bahnen aus Gummi, Kunststoffen und Verbundmaterialien bezüglich der in 4 aufgelisteten signifikanten Gefährdungen. Eine Wickelmaschine zum Aufwickeln beginnt am Fllachbahneinlauf in das Wickelmaschinengestell und endet an der Ablagestelle des Wickels. Eine Wickelmaschine zum Abwickeln beginnt an der Abwickelstelle und endet am Flachbahnauslauf.

Machines pour le caoutchouc et les matières plastiques - Bobineuses pour films ou feuilles - Prescriptions de sécurité

La présente norme européenne spécifie les prescriptions de sécurité pour la conception et la construction de bobineuses pour l'enroulement et le déroulement de films ou de feuilles fabriqués à base de caoutchouc, de matières plastiques ou de matériaux composites par rapport aux phénomènes dangereux significatifs énumérés dans l'article 4. Une bobineuse est délimitée par l'introduction du film ou de la feuille dans la machine d'enroulement d'une part et par le point de décharge de l'enroulement d'autre part. Une débobineuse est délimitée par le poste de déroulage d'une part et la zone de décharge du film ou de la feuille d'autre part

Stroji za predelavo gume in plastike - Navijalniki za folije (filme) in trakove - Varnostne zahteve

General Information

• Status: Withdrawn
• Publication Date: 20-Apr-2004
• Withdrawal Date: 07-Oct-2008
• ICS: 83.200 - Equipment for the rubber and plastics industries
• Technical Committee: CEN/TC 145 - Rubber and plastics machines - Safety
• Drafting Committee: CEN/TC 145/WG 12 - Winding machines for film or sheet - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 08-Oct-2008
• Completion Date: 08-Oct-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN 13418:2004 - Rubber and plastics machines - Winding machines for film or sheet - Safety requirements

Relations

• Merged Into: EN 13418:2004+A1:2008 - Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13418:2004
01-september-2004
Stroji za predelavo gume in plastike - Navijalniki za folije (filme) in trakove -
Varnostne zahteve
Rubber and plastics machines - Winding machines for film or sheet - Safety
requirements
Gummi- und Kunststoffmaschinen - Wickelmaschinen für flache Bahnen -
Sicherheitsanforderungen
Machines pour le caoutchouc et les matieres plastiques - Bobineuses pour films ou
feuilles - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 13418:2004
ICS:
83.200 Oprema za gumarsko Equipment for the rubber and
industrijo in industrijo plastics industries
polimernih materialov
SIST EN 13418:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13418:2004

---------------------- Page: 2 ----------------------

SIST EN 13418:2004
EUROPEAN STANDARD
EN 13418
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2004
ICS 83.200
English version
Rubber and plastics machines - Winding machines for film or
sheet - Safety requirements
Machines pour le caoutchouc et les matières plastiques - Gummi- und Kunststoffmaschinen - Wickelmaschinen für
Bobineuses pour films ou feuilles - Prescriptions de flache Bahnen - Sicherheitsanforderungen
sécurité
This European Standard was approved by CEN on 2 February 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13418:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13418:2004
EN 13418:2004 (E)
Contents Page
Foreword.3
Introduction.4
1 Scope.4
2 Normative references.5
3 Definitions .7
4 List of significant hazards .10
4.1 Mechanical hazards .10
4.2 Hazards resulting from electrical energy.12
4.3 Hazards resulting from unfavourable posture or excess efforts .12
4.4 Hazards resulting from noise .12
4.5 Hazards caused by failure of energy supply.12
4.6 Hazards resulting from failure of control systems .12
4.7 Hazards caused by setting up and maintenance of cutting devices.12
5 Safety requirements and/or protective measures.12
5.1 General safety requirements and/or protective measures .12
5.1.1 Protection of danger points/areas.12
5.1.2 S
...