Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols

This document defines the minimum requirements to ensure the interoperability of hydrogen refuelling points, including refuelling protocols that dispense gaseous hydrogen to road vehicles (e.g. Fuel Cell Electric Vehicles) that comply with legislation applicable to such vehicles.
The safety and performance requirements for the entire hydrogen fuelling station, addressed in accordance with existing relevant European and national legislation, are not included in this document.
NOTE Guidance on considerations for hydrogen fuelling stations is provided in ISO 19880-1.

Gasförmiger Wasserstoff - Betankungsanlagen - Teil 1: Allgemeine Anforderungen

Points de ravitaillement en hydrogène en extérieur distribuant de l'hydrogène gazeux et intégrant des protocoles de remplissage

Le présent document définit les exigences minimales permettant de garantir l'interopérabilité des points de ravitaillement en hydrogène intégrant les protocoles de remplissage qui distribuent de l'hydrogène gazeux pour les véhicules routiers (par exemple, les véhicules électriques à pile à combustible) qui sont conformes à la législation applicable à ces véhicules.
Les exigences de sécurité et de performances relatives à toute la station de remplissage d'hydrogène, traitées conformément à la législation européenne et nationale, ne sont pas incluses dans le présent document.
NOTE Les recommandations relatives aux considérations concernant les stations de remplissage d'hydrogène sont fournies dans l'ISO 19880-1:2020.

Zunanje polnilne postaje za plinasti vodik in postopki polnjenja

General Information

Status
Withdrawn
Public Enquiry End Date
02-Apr-2020
Publication Date
11-Jan-2021
Withdrawal Date
10-Apr-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Apr-2024
Due Date
04-May-2024
Completion Date
11-Apr-2024

Relations

Buy Standard

Standard
EN 17127:2021 - BARVE
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17127:2020 - BARVE
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17127:2021
01-februar-2021
Nadomešča:
SIST EN 17127:2019
Zunanje polnilne postaje za plinasti vodik in postopki polnjenja
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating
filling protocols
Gasförmiger Wasserstoff - Betankungsanlagen - Teil 1: Allgemeine Anforderungen
Points de ravitaillement en hydrogène en extérieur distribuant de l'hydrogène gazeux et
intégrant des protocoles de remplissage
Ta slovenski standard je istoveten z: EN 17127:2020
ICS:
27.075 Tehnologija vodika Hydrogen technologies
71.100.20 Industrijski plini Gases for industrial
application
SIST EN 17127:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17127:2021

---------------------- Page: 2 ----------------------
SIST EN 17127:2021


EN 17127
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2020
EUROPÄISCHE NORM
ICS 27.075; 71.100.20; 75.200 Supersedes EN 17127:2018
English Version

Outdoor hydrogen refuelling points dispensing gaseous
hydrogen and incorporating filling protocols
Points de ravitaillement en hydrogène en extérieur Gasförmiger Wasserstoff - Betankungsanlagen - Teil 1:
distribuant de l'hydrogène gazeux et intégrant des Allgemeine Anforderungen
protocoles de remplissage
This European Standard was approved by CEN on 18 October 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17127:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17127:2021
EN 17127:2020 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 8
5 Characteristics and properties of hydrogen refuelling points . 9
5.1 General requirements . 9
5.2 Fuel Quality . 9
5.3 Dispenser process control . 10
5.3.1 General requirements for the fuelling protocol. 10
5.3.2 Fuelling protocol process limits for light duty vehicle dispensing systems . 10
5.3.3 Fuelling protocol process limits for medium and heavy duty vehicle dispensing
systems .
...

SLOVENSKI STANDARD
oSIST prEN 17127:2020
01-marec-2020
Zunanje polnilne postaje za plinasti vodik in postopki polnjenja
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating
filling protocols
Gasförmiger Wasserstoff - Betankungsanlagen - Teil 1: Allgemeine Anforderungen
Points de ravitaillement en hydrogène en extérieur distribuant de l'hydrogène gazeux et
intégrant des protocoles de remplissage
Ta slovenski standard je istoveten z: prEN 17127
ICS:
27.075 Tehnologija vodika Hydrogen technologies
71.100.20 Industrijski plini Gases for industrial
application
oSIST prEN 17127:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17127:2020

---------------------- Page: 2 ----------------------
oSIST prEN 17127:2020


DRAFT
EUROPEAN STANDARD
prEN 17127
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2020
ICS 27.075; 71.100.20; 75.200 Will supersede EN 17127:2018
English Version

Outdoor hydrogen refuelling points dispensing gaseous
hydrogen and incorporating filling protocols
Points de ravitaillement en hydrogène en extérieur Gasförmiger Wasserstoff - Betankungsanlagen - Teil 1:
distribuant de l'hydrogène gazeux et intégrant des Allgemeine Anforderungen
protocoles de remplissage
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 268.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17127:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17127:2020
prEN 17127:2020 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviated terms . 9
5 Characteristics and properties of hydrogen refuelling points . 9
5.1 General requirements . 9
5.2 Fuel Quality . 10
5.3 Dispenser process control . 10
5.3.1 General requirements for the fuelling protocol.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.