Additive manufacturing of metals - Environment, health and safety - Part 1: Safety requirements for PBF-LB machines (ISO/ASTM DIS 52938-1:2023)

This document deals with the technical requirements and the means for their verification for AM machines using a bed of metallic powder and a laser herein designed as machine.
This document deals with all significant hazards, hazardous situations or hazardous events during all phases of the life of the machine (ISO 12100:2010, 5.4), as listed in Annex A, relevant to the applicable machine when it is used as intended and under conditions of misuse which are reasonably foreseeable
by the manufacturer.
This document does not deal with hazards which can occur:
— during construction;
— operating in potentially explosive atmospheres.
This document is not applicable to machines manufactured before the date of its publication

Additive Fertigung von Metallen - Umwelt, Gesundheit und Sicherheit - Teil 1: Sicherheitsanforderungen für PBF-LB-Maschinen (ISO/ASTM DIS 52938-1:2023)

Dieses Dokument behandelt die technischen Anforderungen und die Mittel zu deren Verifizierung für Maschinen zur Additiven Fertigung (AM), die ein Metallpulverbett, unter Ausschluss pyrophorer Ausgangsmaterialien, und einen Laser verwenden und im Folgenden als Maschine bezeichnet werden.
Dieses Dokument behandelt alle in Anhang A aufgeführten signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse während aller Phasen der Maschinen-Lebensdauer (ISO 12100:2010, 5.4), die bei vorgesehener Nutzung der AM-Maschinen, die ein Metallpulverbett und einen Laser verwenden, unter normalen Bedingungen oder bei durch den Hersteller vorhersehbaren Fehlanwendungen relevant sind.
Dieses Dokument behandelt keine Gefahren, die im Folgenden auftreten können:
   während des Baus;
   beim Betrieb in explosionsgefährdeter Umgebung.
Dieses Dokument gilt nicht für Maschinen, die vor dem Veröffentlichungsdatum dieses Dokuments hergestellt wurden.

Fabrication additive de métaux - Environnement, hygiène et sécurité - Partie 1: Exigences de sécurité pour les machines PBF-LB (ISO/ASTM DIS 52938-1:2023)

Aditivna proizvodnja kovinskih izdelkov - Okolje, zdravje in varnost - 1. del: Varnostne zahteve za stroje za spajanje prahu v postelji z laserskim žarkom (PBF-LB) (ISO/ASTM DIS 52938-1:2023)

General Information

Status
Not Published
Public Enquiry End Date
02-Jul-2023
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
09-May-2023
Due Date
26-Sep-2023
Completion Date
02-Aug-2023

Buy Standard

Draft
prEN ISO/ASTM 52938-1:2023
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52938-1:2023
01-junij-2023
Aditivna proizvodnja kovin - Okolje, zdravje in varnost - 1. del: Varnostne zahteve
za stroje za lasersko spajanje prahu v postelji (PBF-LB) (ISO/ASTM DIS 52938-
1:2023)
Additive manufacturing of metals - Environment, health and safety - Part 1: Safety
requirements for PBF-LB machines (ISO/ASTM DIS 52938-1:2023)
Additive Fertigung von Metallen - Umwelt, Gesundheit und Sicherheit - Teil 1:
Sicherheitsanforderungen für PBF-LB-Maschinen (ISO/ASTM DIS 52938-1:2023)
Fabrication additive de métaux - Environnement, hygiène et sécurité - Partie 1:
Exigences de sécurité pour les machines PBF-LB (ISO/ASTM DIS 52938-1:2023)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52938-1
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
13.110 Varnost strojev Safety of machinery
25.030 3D-tiskanje Additive manufacturing
oSIST prEN ISO/ASTM 52938-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52938-1:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52938-1:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52938-1
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-04-27 2023-07-20
Additive manufacturing of metals — Environment, health
and safety —
Part 1:
Safety requirements for PBF-LB machines
Fabrication additive de métaux — Environnement, hygiène et sécurité —
Partie 1: Exigences de sécurité pour les machines PBF-LB
ICS: 13.110; 13.100; 25.030
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52938-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52938-1:2023
ISO/ASTM DIS 52938-1:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52938-1
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing of metals — Environment, health
and safety —
Part 1:
Safety requirements for PBF-LB machines
Fabrication additive de métaux — Environnement, hygiène et sécurité —
Partie 1: Exigences de sécurité pour les machines PBF-LB
ICS: 13.110; 13.100; 25.030
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2023 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: +41 22 749 01 11 Phone: +610 832 9634
POTENTIAL TO BECOME STANDARDS TO
Fax: +610 832 9635
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org Email: khooper@astm.org
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/ASTM DIS 52938-1:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/ASTM International 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO/ASTM 52938-1:2023
ISO/ASTM DIS 52938-1:2023(E)
Contents Page
Foreword .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.