IEC 61300-3-30:2020 is available as IEC 61300-3-30:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-3-30:2020 describes a method of measuring the end face geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the end face, either withdrawal or protrusion, end face angle relative to the guide pin bor...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 63138-2:2020, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ4 series circular connectors with four RF channels, as well as a detailed specification of the blank format. An MQ4 series circular connector with 50 Ω nominal impedance has four RF channels which can be engaged and disengaged at the same time. There are two versions of plug connectors, one is a quick-lock version, and the other is a threaded version. ...view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61300 defines the encircled angular flux measurement of multimode waveguide light sources, in which most of the transverse modes are excited. The term "waveguide" is understood to include both channel waveguides and optical fibres but not slab waveguides. The applicable fibre types are the followings: - A1 specified in IEC 60793-2-10; - A3 specified in IEC 60793-2-30; - A4 specified in IEC 60793-2-40.

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

IEC 61300-2-14:2021 is available as IEC 61300-2-14:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-2-14:2021 describes a procedure for determining the suitability of a fibre optic interconnecting device or a passive component to withstand exposure to the optical power which occurs during its operation. This fourth edition cancels and replaces the third edition published in 2012. Th...view more

    • sale 15% off
    • Standard
      33 pages
      English and French language

IEC 60793-1-34:2021 is available as IEC 60793-1-34:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60793-1-34:2021 establishes uniform requirements for the mechanical characteristic: fibre curl or latent curvature in uncoated optical fibres, i.e. a specified length of the fibre has been stripped from coating. Fibre curl has been identified as an important parameter for minimizing the spl...view more

    • sale 15% off
    • Standard
      36 pages
      English and French language

IEC 61189-5-601:2021 specifies the reflow soldering ability test method for components mounted on organic rigid printed boards, the reflow heat resistance test method for organic rigid printed boards, and the reflow soldering ability test method for the lands of organic rigid printed boards in applications using solder alloys, which are eutectic or near-eutectic tin-lead (Pb), or lead-free alloys.
The printed boards materials for this organic rigid printed boards are epoxide woven E-glass lamin...
view more

    • sale 15% off
    • Standard
      80 pages
      English and French language

IEC TR 61850-90-13:2021(E), which is a Technical Report, provides information, use cases, and guidance on whether and how to use deterministic networking technologies. Furthermore, this document comprises technology descriptions, provides guidance how to achieve compatibility and interoperability with existing technologies, and lays out migration paths. It will separate the problem statement from the possible solutions.

    • sale 15% off
    • Technical report
      60 pages
      English language

IEC 60958-5:2021 enhances the consumer application of the interface for the interconnection of digital audio equipment defined in IEC 60958-1 and IEC 60958-3, introducing:
- multichannel;
- multi-stream;
- high-resolution;
- multimedia extension;
- related applications.

    • sale 15% off
    • Standard
      40 pages
      English and French language

IEC 63185:2020 relates to a measurement method for complex permittivity of a dielectric substrates at microwave and millimeter-wave frequencies. This method has been developed to evaluate the dielectric properties of low-loss materials used in microwave and millimeter-wave circuits and devices. It uses higher-order modes of a balanced-type circular disk resonator and provides broadband measurements of dielectric substrates by using one resonator, where the effect of excitation holes is taken int...view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

IEC 60794-3-12:2021 is available as IEC 60794-3-12:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60794-3-12:2021 is a detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling to ensure compatibility with ISO/IEC 11801-1. This document's requirements ensure that the ISO/IEC 11801-1 models work for generic cabling and system per...
view more

    • sale 15% off
    • Standard
      17 pages
      English and French language

REN/ERM-TGMAR-604

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      31 pages
      English language
    • sale 15% off
    • Standard
      31 pages
      English language
    • sale 10% off
    • Draft
      31 pages
      English language
    • e-Library read for
      1 day

IEC 61169-65:2021 provides information and rules for the preparation of detail specifications (DS) for series 1,35 mm RF coaxial connectors with screw coupling, characteristic impedance 50 Ω, for operating frequencies up to 90 GHz. Typical use in test and measurement applications.
It describes mating face dimensions for general purpose connectors – grade 1, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail ...
view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

IEC 61169-15:2021 provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling with a characteristic impedance of 50 Ω (type SMA).
This document specifies mating face dimensions for high performance connectors – grade 1, dimensional details of standard test connectors – grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specificat...
view more

    • sale 15% off
    • Standard
      50 pages
      English and French language

IEC TR 62222:2021 describes the test methods for various parameters relating to the reaction to fire properties of metallic and optical fibre communications cables. The parameters have particular importance for cables intended to be installed within buildings and other structures. This document also maps the test methods and associated limits applied to the fire hazards created by particular installation conditions and which can be referenced by other international, regional and national standar...view more

    • sale 15% off
    • Technical report
      45 pages
      English language

2020-10-13: BT D167/C020 to remove EMC and RED link and proceed with the project without link to legislation
2019-12-05: TC decision to carry on implementation as NON hEN - link EMC and RED removed
2019-12-03: NEXT ACTION: TC
2019:12-03: TC decided to set up AHG to look into aligning this AMD with EU regulatory requirements

    • sale 10% off
    • Amendment
      49 pages
      English language
    • e-Library read for
      1 day

IEC 60794-1-2:2021 is available as IEC 60794-1-2:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60794-1-2:2021 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. An objective of this document is to define general requirements and metho...
view more

    • sale 15% off
    • Standard
      33 pages
      English and French language

IEC 61156-12:2021 describes cables intended to be used for transmission of 1 Gbit/s over a single twisted pair for office, home and industrial application. An example of an existing application is 1000BASE-T1; see ISO/IEC TR 11801-9906. The transmission characteristics of these cables are specified up to a frequency of 600 MHz and at a temperature of 20 °C. The cable type recognised is intended to be used for the work area wiring of shielded channels with a nominal length of 40 m. Possible desig...view more

    • sale 15% off
    • Standard
      25 pages
      English language

IEC 62975:2021 provides procedures and guidelines that are intended for the use and maintenance of natural ester liquid in sealed transformers and other electrical equipment.
This document is applicable to natural esters, originally supplied conforming to IEC 62770 and other applicable standards (e.g. ASTM D6871) in transformers, switchgear and electrical apparatus where liquid sampling is practical and where the normal operating conditions specified in the equipment specifications apply.
At p...
view more

    • sale 15% off
    • Standard
      73 pages
      English and French language

IEC 61156-5-1:2009(E) describes symmetrical pair/quad cables intended primarily for horizontal floor cabling as defined in ISO/IEC 11801 and ISO/IEC 24702. It includes additional recommended environmental characteristics and severities which are derived from the environmental classifications that are specified for cabling for various environments. This edition constitutes a technical revision and includes the following significant technical changes with respect to the previous edition:
- new re...
view more

    • sale 15% off
    • Standard
      10 pages
      English language

IEC 61156-6-1:2009(E) describes symmetrical pair/quad cables intended primarily for horizontal floor cabling as defined in ISO/IEC 11801 and ISO/IEC 24702. It includes additional recommended environmental characteristics and severities which are derived from the environmental classifications that are specified for cabling for various environments. This edition constitutes a technical revision and includes the following significant technical changes with respect to the previous edition:
- new re...
view more

    • sale 15% off
    • Standard
      10 pages
      English language

IEC 61758-1:2008 provides general information and guidance on the subject of closures. It includes references, general closure and interface descriptions and definitions. Key words: interface standard for closures

    • sale 15% off
    • Standard
      38 pages
      English and French language

The present document specifies the minimum requirements for shipborne radio transmitters and receivers for fixed
installations operating in the VHF frequency bands between 156 MHz and 174 MHz used by the maritime mobile
service, using both 25 kHz and 12,5 kHz channels and capable of Radiotelephony and Digital Selective Calling
communications within the Global Maritime Distress and Safety System. The present document incorporates the
requirements of the relevant resolutions of the Internation...
view more

    • sale 10% off
    • Standard
      60 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      60 pages
      English language
    • sale 15% off
    • Standard
      60 pages
      English language
    • sale 10% off
    • Draft
      60 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      60 pages
      English language

IEC 62134-1:2009 establishes uniform generic requirements for fibre optic closures. This standard does not cover test and measurement procedures, which are described in IEC 61300 series. The main changes with respect to the previous edition are:
- addition and rewording of some terms and definitions;
- reconsideration of type, style and variant in the requirements;
- removal of quality assessment procedures.

    • sale 15% off
    • Standard
      42 pages
      English and French language

IEC 63138-2:2020, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ4 series circular connectors with four RF channels, as well as a detailed specification of the blank format. An MQ4 series circular connector with 50 Ω nominal impedance has four RF channels which can be engaged and disengaged at the same time. There are two versions of plug connectors, one is a quick-lock version, and the other is a threaded version. ...view more

    • sale 15% off
    • Standard
      54 pages
      English and French language

The present document specifies technical characteristics and methods of measurements for X-band radar sensors
intended for Coastal Surveillance (CS), Vessel Traffic Services (VTS) and harbour surveillance with the following
characteristics:
• Operating in the following frequency range:
- 8 500 MHz to 10 000 MHz utilizing modulated or unmodulated pulses.
• Transmitter Peak Envelope Power up to 100 kW.
• The transmitter output (from power amplifier) towards the antenna uses a hollow metallic...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 10% off
    • Draft
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language

IEC 61300-3-53:2020 is available as IEC 61300-3-53:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61300-3-53:2020 defines the encircled angular flux measurement of multimode waveguide light sources, in which most of the transverse modes are excited. The term "waveguide" is understood to include both channel waveguides and optical fibres but not slab waveguides. The applicable fibre ...
view more

    • sale 15% off
    • Standard
      45 pages
      English and French language

This standard specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions.

    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61000 is applicable to the immunity requirements of electrical and electronic
equipment to radiated electromagnetic energy. It establishes test levels and the required test
procedures.
The object of this document is to establish a common reference for evaluating the immunity of
electrical and electronic equipment when subjected to radiated, radio-frequency
electromagnetic fields. The test method documented in this part of IEC 61000 describes a
consistent method to assess t...
view more

    • sale 10% off
    • Standard
      84 pages
      English language
    • e-Library read for
      1 day

IEC 61300-3-30:2020 is available as IEC 61300-3-30:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61300-3-30:2020 describes a method of measuring the end face geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the end face, either withdrawal or protrusion, end face angle relative to the guide pin...
view more

    • sale 15% off
    • Standard
      41 pages
      English and French language

This document specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet Protocol (IP).
The protocol is intended for use over any network that supports the transmission of IP data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX.
The system performance characteristics for alarm transmission are specified in EN 50136-1.
The performance c...
view more

    • sale 10% off
    • Technical specification
      54 pages
      English language
    • e-Library read for
      1 day

IEC 63185:2020 relates to a measurement method for complex permittivity of a dielectric substrates at microwave and millimeter-wave frequencies. This method has been developed to evaluate the dielectric properties of low-loss materials used in microwave and millimeter-wave circuits and devices. It uses higher-order modes of a balanced-type circular disk resonator and provides broadband measurements of dielectric substrates by using one resonator, where the effect of excitation holes is taken int...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

This part of IEC 60794 is a family specification covering optical fibre outdoor cables which are
flame retardant and thus also applicable to indoor environments. These cables generally
possess the characteristics associated with outdoor cable designs having similar thermal and
mechanical robustness that makes them suitable for use in the outside plant, while
simultaneously exhibiting the fire performance required in indoor premises. A typical application
is for example the extension of a "s...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60794 is a sectional specification covering general features of optical fibre
cables applicable to outdoor as well as indoor environments, called "indoor-outdoor cables".
Indoor-outdoor cables are deployed in outside plant environments as well as in premises thus
fulfilling outdoor as well as indoor requirements. Typical application spaces are, for example,
extension of a duct cable into a building or using this design for centralized cabling in the central
office, the prem...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60794 is a family specification covering features of optical fibre cables
applicable to outdoor as well as indoor environments, called "universal indoor-outdoor cables".
These cables generally possess the characteristics associated with outdoor cable designs
(according to IEC 60794-3, however typically less stringent, and typically "non armoured")
having the thermal and mechanical robustness that makes them suitable for use in the outside
plant, while simultaneously being f...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

This part of IEC 60794 is a family specification covering optical fibre indoor cables that are
deployed in short length (≤ 10 m) outdoor environments. These cables generally possess the
characteristics associated with indoor cable designs having the appropriate fire performance
and flexibility that makes them suitable for use in premises. Because of its predicted use
outdoors, stability against environmental attack, for example UV radiation and humidity (see
IEC 60794-6:2020, Table 1), is i...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 62485-5:2020 applies to the installation of one or more stationary secondary batteries having a maximum aggregate DC voltage of 1 500 V to any DC part of the power network, and describes the principal measures for protections during normal operation or under expected fault conditions against hazards generated from:
– electricity,
– short-circuits,
– electrolyte,
– gas emission,
– fire,
– explosion.
This document provides requirements on safety aspects associated with the installation,...
view more

    • sale 15% off
    • Standard
      76 pages
      English and French language

The objective of this part of IEC 62433 is to describe the extraction flow for deriving an
immunity macro-model of an Integrated Circuit (IC) against conducted Electrostatic Discharge
(ESD) according to IEC 61000-4-2 and Electrical Fast Transients (EFT) according to
IEC 61000-4-4.
The model addresses physical damages due to overvoltage, thermal damage and other failure
modes. Functional failures can also be addressed.
This model allows the immunity simulation of the IC in an application. T...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61290 applies to all commercially available optical amplifiers (OAs) and
optically amplified modules. It applies to OAs using optical fibre amplifiers (OFAs) based on
either rare-earth doped fibres or on the Raman effect, semiconductor OAs (SOAs) and planar
optical waveguide amplifiers (POWAs).
The object of this document is to establish uniform requirements for accurate and reliable
measurements, by means of the optical spectrum analyzer (OSA) test method, of the following...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches
need to satisfy in order to be categorized as meeting the requirements of category C – controlled
environments, as defined in Annex A of IEC 61753-1:2018.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

IEC/TR 62785:2013(E) reiterates all the key normative "shall" texts included in IEC 62430 that specify requirements and procedures to integrate environmental aspects into the design and development processes of electrical and electronic products, including combinations of products, and the materials and components of which they are composed. This report also conveys information on the experiences and best practices of environmental consciousness of fibre optics related products and subsystems. K...view more

    • sale 15% off
    • Technical report
      11 pages
      English language

The present document specifies technical characteristics and methods of measurements for digital terrestrial television
broadcast receivers fitted with an external antenna input (tuner port) capable of receiving DVB-T and/or DVB-T2
signals.
Receivers without external antenna connectors, receivers with diversity, and receivers intended for mobile or
automotive reception are not covered by the present document.
NOTE: The relationship between the present document and essential requirements of ...
view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 10% off
    • Draft
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      36 pages
      English language

The present document specifies technical characteristics and methods of measurements for radio transmitters and
receivers used in the Euroloop communications system. The system is used in railway systems.
The present document applies to the following equipment:
1) The On-Board Equipment (OBE) transmitting the tele-powering to wake-up the Trackside Equipment and
receiving the Euroloop signal. The OBE comprises a receiver fitted with a dedicated antenna.
2) The Trackside Equipment receiving t...
view more

    • sale 15% off
    • Standard
      38 pages
      English language
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      38 pages
      English language