• sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short term tensile welding factor.
A tensile test may be used in conjunction with other tests (e.g. bend, tensile creep, macro) to assess the performance of welded assemblies, made from thermoplastics materials.
The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled, but not ...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

This document provides the requirements for the tests made on welded thermoplastics semi-finished products.
The selection of the appropriate test method(s) should be made in accordance with the particular type and application of welded product.
The test results depend on the conditions of manufacture for the test specimen and on the test conditions. They can therefore only be related to the behaviour of the product or can only be used for designing a structure, if the test conditions can be re...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This draft European Standard specifies product characteristics for thermoplastics rigid protective wallcovering panels whose purposes are decorative and protective, but non-structural.
The products covered by this draft European Standard are intended to be used as finishes for hanging onto internal walls and wall partitions by means of adhesive.
For the specified characteristics of these products, this draft European Standard provides for each of it corresponding: requirement(s), assessment me...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document describes a method for defining requirements and assuring component integrity for plastic parts created using material extrusion based additive manufacturing processes. It covers the process, equipment and operational parameters. Processes include all material extrusion based additive manufacturing processes.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a relative method for the determination of polypropylene (PP) isotactic index by low-resolution pulsed nuclear magnetic resonance spectroscopy (LR-NMR). This method enables the identification and coding of types H propylene (PP-H) plastics according to ISO 19069‑1. This method is suitable for base polymers and is not applicable for mixtures. NOTE The direct method for the determination of polypropylene isotactic index is specified in ISO 9113.

    • sale 15% off
    • Standard
      9 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      English language
    • sale 15% off
    • Draft
      8 pages
      English language

This document specifies the material, mechanical and functional (fitness for purpose) requirements for warning devices with visual characteristics manufactured from plastics, intended to indicate the presence of cables and piping systems buried in ground when opening trenches and more generally during digging work.
This document also specifies the test methods referred to in this document.
This document is applicable to two types of visual warning devices: tapes (type 1) and meshes (type 2).

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for two types of hose assemblies (Types D and SD) and four grades based on electrical properties with hoses made of rubber or thermoplastics and hose fittings made of metal designed to convey liquid or gaseous chemical substances, hereinafter termed the “chemicals conveyed”.
The hose assemblies are intended for use with chemicals conveyed in the temperature range of –20 °C to +65 °C at a working pressure ≤ 10 bar1).
NOTE 1 This document sets out requirement...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      48 pages
      English language
    • e-Library read for
      1 day

This document specifies an analysis method for determining the activation energy using the Ozawa-Friedman plot. It also specifies the preparation of master plots for verification of the reaction kinetics determined by thermogravimetry.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Draft
      14 pages
      English language
    • sale 15% off
    • Draft
      14 pages
      English language

This document specifies a method for the determination of the activation energy, Ea, in the Arrhenius formula for the decomposition of polymers using a thermogravimetric technique. The method is applicable only if the reaction proceeds by a single mechanism. It is applicable to multistage reactions if they consist of clearly separated single-stage steps.

    • sale 15% off
    • Standard
      6 pages
      English language
    • sale 15% off
    • Draft
      6 pages
      English language
    • sale 15% off
    • Draft
      6 pages
      English language

This document specifies requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas and designed for use at working pressures ranging from vacuum to a maximum of 2,5 MPa (25 bar) within the temperature range −30 °C to +70 °C or, for low-temperature hoses (designated -LT), within the temperature range −50 °C to +70 °C.

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      English language

This document specifies a method for determining the lap-shear strength of the adhesive joint between carbon fibre-reinforced plastics (CFRPs) and metal adherends, using a standard specimen loaded in tension and under specified conditions of preparation, conditioning and testing. This method is intended for assessing the suitability of adhesives to be used for bonding a carbon fibre reinforced plastic (CFRPs) to a metal.

    • sale 15% off
    • Draft
      7 pages
      English language
    • sale 15% off
    • Standard
      7 pages
      English language
    • sale 15% off
    • Draft
      7 pages
      English language

This document specifies the requirements for rubber hoses and hose assemblies for wet and dry sand and grit blasting, suitable for use up to a maximum working pressure of 0,63 MPa (6,3 bar) and over an operating temperature range of −25 °C to +70 °C.

    • sale 15% off
    • Standard
      8 pages
      French language
    • sale 15% off
    • Standard
      7 pages
      English language
    • sale 15% off
    • Draft
      8 pages
      French language
    • sale 15% off
    • Draft
      7 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      French language
    • sale 15% off
    • Draft
      7 pages
      English language

This standard specifies the essential safety requirements for the design, construction and use of injection moulding machines for the processing of plastics and/or rubber.

    • sale 10% off
    • Standard
      161 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      161 pages
      English language
    • e-Library read for
      1 day

This document specifies characteristics for adhesives for floor coverings, which comprise:
— resilient floor coverings (such as those manufactured from plastics, linoleum or rubber);
— textile floor coverings.
Adhesives for floor coverings are intended for use within a building according to the manufacturer's specification.
This document specifies requirements for establishing performance characteristics of adhesives for floor coverings with regard to their determination, evaluation and expr...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of PE-UHMW moulding and extrusion materials. It gives the requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. This document gives the procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are m...view more

    • sale 15% off
    • Draft
      20 pages
      English language
    • sale 15% off
    • Standard
      21 pages
      French language
    • sale 15% off
    • Draft
      22 pages
      French language
    • sale 15% off
    • Standard
      20 pages
      English language
    • sale 15% off
    • Draft
      21 pages
      French language
    • sale 15% off
    • Draft
      19 pages
      English language

This document specifies a thermogravimetric method for the determination of fibre weight content by weight percent, of carbon fibre reinforced composites. This method applies to pre-products, such as, prepregs, parts and products of carbon fibre reinforced composites.

    • sale 15% off
    • Standard
      10 pages
      English language
    • sale 15% off
    • Draft
      10 pages
      English language
    • sale 15% off
    • Draft
      11 pages
      English language

This document specifies the test method for the determination of adhesive fracture energy of adhesively bonded plates of carbon fibre reinforced plastic (CFRP) and metal using a double cantilever beam (DCB) specimen. The test method is also applicable to bonded joints between metals and other composite materials, such as glass fibre reinforced plastics.

    • sale 15% off
    • Standard
      22 pages
      English language
    • sale 15% off
    • Draft
      22 pages
      English language
    • sale 15% off
    • Draft
      19 pages
      English language

This document specifies a system for sampling procedures for testing plastics waste and recyclates which take into account the specifics of the plastics waste and recyclates. It is intended to cover all stages of the plastic recycling process.
The sampling procedures include the statistical specifics of the plastic waste and the behaviour of recyclates.
The sampling method is expected to produce a representative testing sample. Differences can arise due to:
-   the mixture of plastics;
-   the o...
view more

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day

This document provides a scheme for the assessment of conformity of PE products and assemblies for the rehabilitation of existing pipelines, in accordance with the applicable parts of ISO 11296, ISO 11297, ISO 11298, ISO 11299 and ISO 21225, and intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE In order to help the reader, summary tables of overall scheme requirements are provided in An...
view more

    • sale 10% off
    • Technical specification
      54 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      51 pages
      English language
    • e-Library read for
      1 day

This document describes and classifies a range of laboratory ignition sources for use in fire tests on plastics and products consisting substantially of plastics. These sources vary in intensity and area of impingement. They are suitable for use to simulate the initial thermal abuse to which plastics are potentially exposed in certain actual fire risk scenarios. This compilation of standard ignition sources describes the ignition sources used by different standards development organizations and ...view more

    • sale 15% off
    • Draft
      37 pages
      English language
    • sale 15% off
    • Standard
      37 pages
      English language
    • sale 15% off
    • Draft
      40 pages
      English language

This document specifies a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens having a density less than 250 kg⋅m−3 determined in accordance with ISO 845, when exposed to a small-flame ignition source. NOTE Another International Standard which covers flexible cellular plastic and cellular rubber is ISO 3582[2]. This method of test is intended for quality assurance and limited product evaluation o...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Draft
      16 pages
      English language
    • sale 15% off
    • Draft
      16 pages
      English language

This document specifies various test methods to ensure the performance of polymeric composite and reinforced polymeric composite sleepers, bearers and transoms for use in tracks. It is applicable to the sleepers, bearers and transoms to be installed in tracks with or without a ballast.

    • sale 15% off
    • Standard
      43 pages
      English language
    • sale 15% off
    • Draft
      43 pages
      English language

This document specifies a method for the determination of the ultimate anoxic biodegradability of plastics made of organic compounds, where the amount of the produced nitrogen and carbon dioxide at the end of the test is measured.
The test substance is exposed to an inoculum stemming from the denitrification tank of a wastewater treatment plant. Testing is performed under defined laboratory conditions.

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day

This document specifies a laboratory test method for determining the degree and rate of the aerobic biodegradation level of plastic materials. Biodegradation is determined by measuring the CO2 evolved from plastic materials when exposed to seawater sampled from coastal areas under laboratory conditions. The conditions described in this document might not always correspond to the optimum conditions for the maximum degree of biodegradation, however this test method is designed to give an indicatio...view more

    • sale 15% off
    • Standard
      16 pages
      English language
    • sale 15% off
    • Draft
      16 pages
      English language
    • sale 15% off
    • Draft
      15 pages
      English language

This document specifies a laboratory test method for determining the degree and rate of the aerobic biodegradation level of plastic materials. Biodegradation of plastic materials is determined by measuring the oxygen demand in a closed respirometer when exposed to seawater sampled from coastal areas under laboratory conditions. The conditions described in this document might not always correspond to the optimum conditions for the maximum degree of biodegradation, however this test method is desi...view more

    • sale 15% off
    • Standard
      12 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      English language

This part of ISO 16486 specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers.
ISO 16486 is applicable to PA-U piping systems the components of which are connected by fusion jointing and/or mechanical jointing.
In addition, it lays down dimensional characteristics and requirement...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      19 pages
      English language
    • e-Library read for
      1 day

This document establishes a vocabulary of and is limited to those terms in general use throughout the rubber industry. It does not define terms intended for particular rubber products, some of which are given in the vocabulary standards listed in the Bibliography. It does not define terms that are generally understood or adequately defined in other readily available sources such as general dictionaries. The terms are listed in the alphabetical order of the English terms, with an index to the cor...view more

    • sale 15% off
    • Standard
      67 pages
      English language
    • sale 15% off
    • Draft
      70 pages
      French language
    • sale 15% off
    • Standard
      69 pages
      French language
    • sale 15% off
    • Draft
      67 pages
      English language

This document specifies a method for the determination of low specific surface area of powders ELTs rubber by measuring the amount of physically adsorbed krypton gas and applying the theoretical multipoint Brunnauer, Emmett and Teller (BET) method.
This document defines a specific method for powders taking into account that, in order to obtain an accurate value of specific surface area, a representative sample of the material to be tested is taken according to the principle that every particle ...
view more

    • sale 10% off
    • Technical specification
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      10 pages
      English language
    • e-Library read for
      1 day

This document provides criteria for the sorting of whole end-of-life tyres (WELT) into different classes based on categories. It also provides criteria for the determination of their suitability to be used in recycling and material recovery processes.
The processes described in this document include sorting WELTs in order to determine their acceptance in recovery and recycling processes.
Criteria regarding the reuse of tyres to be mounted again in a vehicle are not addressed in this document.
...
view more

    • sale 10% off
    • Technical specification
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      15 pages
      English language
    • e-Library read for
      1 day

This part of ISO 16486 specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels.
It also specifies the test parameters for the test methods to which it refers.
ISO 16486 is applicable to PA-U piping systems the components of which are connected by fusion jointing and/or mechanical jointing.
In addition, it lays down dimensional characteristics and require...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 15% off
    • Standard
      1 page
      French language
    • sale 15% off
    • Draft
      1 page
      French language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Draft
      1 page
      English language

This document specifies the methods of preparation of test specimens and the test methods to be used
in determining the properties of PS-I moulding and extrusion materials. It establishes the requirements
for handling test material and for conditioning both the test material before moulding and the
specimens before testing.
This document gives procedures and conditions for the preparation of test specimens and procedures
for measuring properties of the materials from which these specimens a...
view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies a method for the determination of the mass per unit area. It also specifies five
methods (Method A to Method E) for the determination of the fibre mass per unit area of moulding
compounds and prepregs. The five methods are as follows:
— Method A: Extraction by Soxhlet;
— Method B: Extraction by immersion in solvent in a beaker;
— Method C: Decomposition by loss ignition;
— Method D: Extraction by wet combustion;
— Method E: Method by calculation.
This document is ...
view more

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      19 pages
      English language
    • e-Library read for
      1 day

This part of ISO 16486 specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers.
ISO 16486 is applicable to PA-U piping systems the components of which are connected by fusion jointing and/or mechanical jointing

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      30 pages
      English language
    • e-Library read for
      1 day

This document specifies: — the physical and chemical tests on raw rubbers, and — the standardized materials, a standardized test formulation, equipment, and processing methods for evaluating the vulcanization characteristics of all types of isobutene-isoprene rubber (IIR).

    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Draft
      11 pages
      English language

This document specifies accelerated moisture absorption properties and supersaturated conditioning by moisture for fibre-reinforced plastics) using sealed pressure vessel at higher temperature than 100 °C with saturated water vapour at used heating temperature. The purpose of this moisture absorbing procedure is to screen test specimens with moisture by mechanical or thermal properties. This document applies to carbon-fibre materials and their products with either thermoset or thermoplastic matr...view more

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Draft
      13 pages
      English language

This document specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers. The ISO 16486 series of standards is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing. In addition, this document lays down dimensional charac...view more

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Standard
      16 pages
      French language
    • sale 15% off
    • Draft
      14 pages
      English language

This document establishes a system of designation for polystyrene thermoplastic material, which can
be used as the basis for specifications.
The types of polystyrene plastics are differentiated from each other by a classification system based on
appropriate levels of the designatory properties:
a) Vicat softening temperature, and
b) melt mass-flow rate.
and on information about the intended application and/or method of processing, important properties,
additives and colorants, fillers and...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day

This document establishes a method for measurement of specific heat capacity, cp, using temperature modulated differential scanning calorimetry.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Draft
      13 pages
      English language

This document gives a brief overview of the current (2019) situation in plastic recycling systems, relevant existing standards and short description of different recycling techniques. It aims to identify the necessity of standards in the plastics recycling system and give direction for the adoption of regional standards and/or the development of new and existing standards. This document addresses various recycling options, with focus on, but not limited to, mechanical recycling, chemical and/or ...view more

    • sale 15% off
    • Technical report
      24 pages
      English language
    • sale 15% off
    • Draft
      24 pages
      English language
    • sale 15% off
    • Standard
      1 page
      English language
    • sale 15% off
    • Standard
      1 page
      French language
    • sale 15% off
    • Draft
      1 page
      French language
    • sale 15% off
    • Draft
      1 page
      English language

This document specifies a measuring method for the characterization of rheological properties of structural adhesives using oscillatory rheometry. The advantage of the method in comparison to rotational viscometry measurements lies in the separation of elastic and viscous material properties, thus allowing to define the viscoelastic properties. This enables more precise information concerning the flow behaviour of the materials, thereby resulting in a better understanding of their processing pro...view more

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486‑1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers. The ISO 16486 series is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing. In addition, it lays down dimensional characteristics and require...view more

    • sale 15% off
    • Standard
      24 pages
      French language
    • sale 15% off
    • Standard
      23 pages
      English language
    • sale 15% off
    • Draft
      23 pages
      French language
    • sale 15% off
    • Draft
      20 pages
      English language

This document specifies a test method for the determination of abrasive wear resistance of plastics using abrasive material on a reciprocating motion. It also specifies calculation method for specific wear rate.

    • sale 15% off
    • Standard
      14 pages
      English language
    • sale 15% off
    • Draft
      9 pages
      English language

This document specifies the method of testing the knowledge and skill of a welder who is required to carry out welds on thermoplastics in new constructions and repair work.
The skill examination of a welder is an essential condition for the assurance of the quality of the welding work.
The application of this document guarantees that the examination is carried out according to a uniform test procedure.
This document applies when the contractor or the authorities responsible for the applicatio...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      46 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for three types of textile-reinforced thermoplastics hoses and
hose assemblies of nominal size from 3,2 to 25. Each type is divided into two classes dependent on
electrical conductivity requirements.
They are suitable for use with:
— oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging
from −40 °C to +93 °C;
— water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging
from 0 ...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      16 pages
      English language
    • e-Library read for
      1 day

ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data
for certain basic properties of plastics. In general, each property is specified by a single experimental
value, although in certain cases properties are represented by two values obtained under different test
conditions or along different directions in the material. The properties included are those presented
conventionally in manufacturers' data sheets.
This document applies to reinforced...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "win...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day