EN 1915-2:2001+A1:2009
(Main)Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
This Part of EN 1915 specifies the conditions to be taken into consideration when calculating the strength and the stability of GSE according to EN 1915-1 and the EN 12312 series under intended use conditions. It also specifies general test methods.
NOTE The methods given in this standard demonstrate one way of achieving an acceptable safety level. Methods that produce comparable results may be used.
This Part of EN 1915 does not establish additional requirements for the following:
- operation elsewhere than in an airport environment;
- operation in severe conditions, e.g. ambient temperature below -20 C or over 50 C, tropical or saturated salty atmospheric environment;
- hazards caused by wind velocity in excess of the figures given in this European Standard;
- earthquake, flood, landslide, lightning and more generally any natural catastrophe.
This Part of EN 1915 is not applicable to GSE which are manufactured before the date of publication by CEN of this Standard.
Luftfahrt-Bodengeräte - Allgemeine Anforderungen - Teil 2: Standsicherheits- und Festigkeitsanforderungen, Berechnungen und Prüfverfahren
Dieser Teil von EN 1915 fasst die Bedingungen zusammen, die bei der Berechnung der Festigkeit und der
Standsicherheit von Luftfahrt-Bodengeräten entsprechend !EN 1915-1" und der Normenreihe EN 12312
für die bestimmungsgemäße Verwendung zu beachten sind. Sie gibt auch die Voraussetzungen an, unter
denen Prüfungen durchzuführen sind.
ANMERKUNG Die in dieser Norm angegebenen Methoden bieten einen möglichen Weg zum Erreichen eines annehmbaren
Sicherheitsniveaus. Methoden, die vergleichbare Ergebnisse liefern, dürfen ebenfalls angewendet werden.
In diesem Teil von EN 1915 sind für folgende Aspekte keine zusätzlichen Festlegungen enthalten:
- Betrieb außerhalb des Flughafens;
- Betrieb unter erschwerten Bedingungen, z. B. bei Umgebungstemperaturen unter −20 °C oder über
50 °C, in tropischer oder in gesättigter Salz-Atmosphäre;
- Gefährdungen aus Windgeschwindigkeiten oberhalb der in dieser Europäischen Norm angegebenen
Werte;
- Erdbeben, Überschwemmungen, Erdrutsche, Blitze und allgemein jede Art von Naturkatastrophen.
Dieser Teil von EN 1915 ist nicht auf Bodengeräte anzuwenden, die vor der Veröffentlichung dieser Norm
durch CEN hergestellt wurden.
Matériel au sol pour aéronefs - Exigences générales - Partie 2: Prescriptions de stabilité et de résistance mécanique, calculs et méthodes d'essai
Podporna oprema na tleh za letalski promet - Splošne zahteve - 2. del: Zahteve za stabilnost in vzdržljivost, izračuni in preskusni postopki
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luftfahrt-Bodengeräte - Allgemeine Anforderungen - Teil 2: Standsicherheits- und Festigkeitsanforderungen, Berechnungen und PrüfverfahrenMatériel au sol pour aéronefs - Exigences générales - Partie 2: Prescriptions de stabilité et de résistance mécanique, calculs et méthodes d'essaiAircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods49.100Oprema za servis in vzdrževanje na tlehGround service and maintenance equipmentICS:Ta slovenski standard je istoveten z:EN 1915-2:2001+A1:2009SIST EN 1915-2:2002+A1:2009en,de01-junij-2009SIST EN 1915-2:2002+A1:2009SLOVENSKI
STANDARD
SIST EN 1915-2:2002+A1:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1915-2:2001+A1
March 2009 ICS 49.100 Supersedes EN 1915-2:2001English Version
Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
Matériel au sol pour aéronefs - Exigences générales - Partie 2: Prescriptions de stabilité et de résistance mécanique, calculs et méthodes d'essai
Luftfahrt-Bodengeräte - Allgemeine Anforderungen - Teil 2: Standsicherheits- und Festigkeitsanforderungen, Berechnungen und Prüfverfahren This European Standard was approved by CEN on 6 January 2001 and includes Amendment 1 approved by CEN on 15 February 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1915-2:2001+A1:2009: ESIST EN 1915-2:2002+A1:2009
EN 1915-2:2001+A1:2009 (E) 2 Contents Page Foreword .4Introduction .61 Scope .62 Normative references .73 Terms and definitions .84 List of hazards .95
!!!!Safety requirements and/or protective measures"""" .95.1 General .95.2 Requirements for the strength calculation of steel constructions .95.2.1 General remarks.95.2.2 Loads and load combinations . 105.2.3 Materials . 125.2.4 Factors for stress calculations . 125.2.5 Combined stresses . 125.2.6 Fatigue .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.