EN 12312-4:2003+A1:2009

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

This European Standard specifies the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, operation and maintenance of PBB's when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some require-ments recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This standard applies to:
-   apron-drive bridges;
-   fixed-head bridges (also referred to as nose loaders) or pedestal bridges;
-   suspended bridges,
for embarking/disembarking of passengers. It is applicable from the interface of the building to the connection with the aircraft. An example of a typical PBB is shown in annex A.
This standard does not apply to:
-   elevating lounges;
-   passenger stairs;
-   other forms of aircraft access equipment
or to the fixed building structure to which the PBB interfaces.
This standard does not establish requirements for hazards caused by noise and vibration.
This Part of EN 12312 is not applicable to PBB's which are manufactured before the date of publication of this standard by CEN.
This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.

Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 4: Fluggastbrücken

Diese Europäische Norm legt die technischen Anforderungen zur Minimierung der in Abschnitt 4 aufgelisteten
Gefährdungen fest, die bei Inbetriebnahme, Betrieb und Wartung von Fluggastbrücken auftreten können,
wenn diese in Übereinstimmung mit den Anweisungen des Herstellers oder seines Beauftragten ausgeführt
werden. Sie berücksichtigt auch einige Anforderungen, die von offiziellen Stellen, Luftfahrzeug- und Bodengeräteherstellern
sowie Luftverkehrs- und Abfertigungsgesellschaften als wesentlich erachtet wurden.
Diese Norm gilt für:
⎯ Brücken mit Fahrwerk;
⎯ Brücken mit festem Kopf (auch Noseloader genannt) oder Podestbrücken;
⎯ frei hängende Brücken,
für das Ein- und Aussteigen von Fluggästen. Sie ist nur anzuwenden auf den Teil zwischen Abfertigungsgebäude
und Luftfahrzeug. Ein Beispiel einer typischen Fluggastbrücke ist in Anhang A enthalten.
Diese Norm gilt nicht für:
⎯ Lift-Lounges;
⎯ Fluggasttreppen;
⎯ andere Bauarten von Einrichtungen zum Einsteigen in Luftfahrzeuge;
oder feste Gebäudeteile, mit denen die Fluggastbrücke verbunden ist.
Diese Norm enthält keine Festlegungen für Gefährdungen, die durch Lärm und Vibration verursacht werden.
Dieser Teil von EN 12312 gilt nicht für Fluggastbrücken, die vor der Veröffentlichung dieser Norm durch CEN
hergestellt wurden.
!Es ist beabsichtigt, diesen Teil der EN 12312 in Verbindung mit EN 1915-1, EN 1915-2, EN 1915-3 (für
Fahrzeuge) und EN 1915-4 anzuwenden."

Matériel au sol pour aéronefs - Exigences particulières - Partie 4: Passerelles passagers

Podporna oprema na tleh za letalski promet - Posebne zahteve - 4. del: Mostiči za vkrcanje na potniška letala

General Information

• Status: Withdrawn
• Publication Date: 28-Apr-2009
• Withdrawal Date: 25-Mar-2014
• ICS: 49.100 - Ground service and maintenance equipment
• Technical Committee: CEN/TC 274 - Aircraft ground support equipment
• Drafting Committee: CEN/TC 274/SC 2/WG 4 - Passenger boarding bridges
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Mar-2014
• Completion Date: 26-Mar-2014
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 12312-4:2004+A1:2009 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

Relations

• Merged From: EN 12312-4:2003 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
• Effective Date: 19-Jan-2023
• Merged From: EN 12312-4:2003/prA1 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
• Effective Date: 18-Jan-2023
• Replaced By: EN 12312-4:2014 - Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 4: FluggastbrückenMatériel au sol pour aéronefs - Exigences particulières - Partie 4: Passerelles passagersAircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges49.100Oprema za servis in vzdrževanje na tlehGround service and maintenance equipmentICS:Ta slovenski standard je istoveten z:EN 12312-4:2003+A1:2009SIST EN 12312-4:2004+A1:2009en,de01-julij-2009SIST EN 12312-4:2004+A1:2009SLOVENSKI
STANDARD



SIST EN 12312-4:2004+A1:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12312-4:2003+A1
April 2009 ICS 49.100 Supersedes EN 12312-4:2003English Version
Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
Matériel au sol pour aéronefs - Exigences particulières - Partie 4: Passerelles passagers
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 4: Fluggastbrücken This European Standard was approved by CEN on 17 January 2003 and includes Amendment 1 approved by CEN on 1 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12312-4:2003+A1:2009: ESIST EN 12312-4:2004+A1:2009



EN 12312-4:2003+A1:2009 (E) 2
Contents
page Foreword . 3Introduction . 41Scope . 42Normative references . 43Terms and definitions . 54List of hazards . 75Safety requirements and/or measures . 75.1General requirements . 75.2Controls, monitoring and warning devices . 75.3Vertical drive systems . 85.4Horizontal drive systems . 85.5Bridgehead rotation system . 95.6Operating speeds. 95.7Passenger accommodation . 95.8Operator's workplace . 105.9Service stairs and landings .
...