Safety of woodworking machines - Handfed surface planing machines

This European standard specifies out the requirements and/or measures to remove the hazards and limit the risk on hand fed surface planing machines hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings.  Electrically driven machines excluded from the scope of this standard are covered by the requirements of EN 61029-1:1995 or EN 50144-1: 1995 and prEN 61029-2-3: 1996.  This European standard covers all the hazards relevant to this machine. These hazards are listed in clause 4.  This European Standard does not apply to machines set up on a bench or a table similar to a bench which are intended to carry out work in a stationary position and capable of being lifted by one person.  This European standard applies to hand fed surface planing machines which can or can not be designed to be used with a demountable power feed unit.  This European standard applies to woodworking machines fixed in position during working. This includes machines which are fixed whilst working but transportable by the operator from one workstation to another.  This European standard does not apply to hand held woodworking machines or any adaptation permitting their use in a different mode i.e. bench mounting.  This European standard is primarily applicable to machines which are manufactured after the date of issue of this European standard.

Sicherheit von Holzbearbeitungsmaschinen - Abrichthobelmaschinen mit Handvorschub

Diese europäische Norm beschreibt die Anforderungen und/oder Verfahren für die Beseitigung von Gefährdungen und zur Begrenzung der Risiken an Abrichthobelmaschinen mit Handvorschub - nachfolgend als "Maschinen" bezeichnet -, die bestimmt sind zum Hobeln von Massivholz, Spanplatten, Faserplatten, Sperrholz sowie diesen Werkstoffen, wenn sie kunststoffbeschichtet oder mit Kunststoffkanten versehen sind. Für die im Anwendungsbereich dieser Norm ausgenommenen Maschinen treffen die Anforderungen in EN 61029-1:1995 oder EN 50144-1:1995 und die Anforderungen in EN 61029-2-3:1996 zu.

Sécurité des machines pour le travail du bois - Machines a dégauchir a avance manuelle

La présente norme européenne spécifie les prescriptions et/ou les mesures pour éliminer les phénomenes dangereux et limiter les risques sur les machines a dégauchir a avance manuelle (désignées ci-apres sous le terme machines) conçues pour usiner du bois, des panneaux de fibres ou de particules, de contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de plastique. Les machines a entraînement électrique exclues du domaine d'application de la présente norme sont soumises aux prescriptions des EN 61029-1:1995 ou EN 50144-1:1995 et les prescriptions du prEN 61209-2-3:1996.

Safety of woodworking machines - Handfed surface planing machines

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
11-Jan-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Jan-2009
Due Date
01-Feb-2009
Completion Date
12-Jan-2009

Relations

Buy Standard

Standard
EN 859:2000
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 859:2000
01-april-2000
Safety of woodworking machines - Handfed surface planing machines
Safety of woodworking machines - Handfed surface planing machines
Sicherheit von Holzbearbeitungsmaschinen - Abrichthobelmaschinen mit Handvorschub
Sécurité des machines pour le travail du bois - Machines a dégauchir a avance manuelle
Ta slovenski standard je istoveten z: EN 859:1997
ICS:
25.080.25 6WURML]DSORãþLQVNRREGHODYR Planing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 859:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 859:2000

---------------------- Page: 2 ----------------------

SIST EN 859:2000

---------------------- Page: 3 ----------------------

SIST EN 859:2000

---------------------- Page: 4 ----------------------

SIST EN 859:2000

---------------------- Page: 5 ----------------------

SIST EN 859:2000

---------------------- Page: 6 ----------------------

SIST EN 859:2000

---------------------- Page: 7 ----------------------

SIST EN 859:2000

---------------------- Page: 8 ----------------------

SIST EN 859:2000

---------------------- Page: 9 ----------------------

SIST EN 859:2000

---------------------- Page: 10 ----------------------

SIST EN 859:2000

---------------------- Page: 11 ----------------------

SIST EN 859:2000

---------------------- Page: 12 ----------------------

SIST EN 859:2000

---------------------- Page: 13 ----------------------

SIST EN 859:2000

---------------------- Page: 14 ----------------------

SIST EN 859:2000

---------------------- Page: 15 ----------------------

SIST EN 859:2000

---------------------- Page: 16 ----------------------

SIST EN 859:2000

---------------------- Page: 17 ----------------------

SIST EN 859:2000

---------------------- Page: 18 ----------------------

SIST EN 859:2000

---------------------- Page: 19 ----------------------

SIST EN 859:2000

---------------------- Page: 20 ----------------------

SIST EN 859:2000

---------------------- Page: 21 ----------------------

SIST EN 859:2000

---------------------- Page: 22 ----------------------

SIST EN 859:2000

---------------------- Page: 23 ----------------------

SIST EN 859:2000

---------------------- Page: 24 ----------------------

SIST EN 859:2000

---------------------- Page: 25 ----------------------

SIST EN 859:2000

---------------------- Page: 26 ----------------------

SIST EN 859:2000

---------------------- Page: 27 ----------------------

SIST EN 859:2000

---------------------- Page: 28 ----------------------

S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.