SIST EN ISO 14122-1:2002
(Main)Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001)
This standard applies to all machinery (stationary and mobile) where fixed means of access are necessary. This standard applies to access means which are an integral part of a machine. This standard could also apply to means of access to that part of the building (e.g. working platforms, walkways, ladders) where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine. NOTE: This standard may be used in other conditions of use, but to respect the National regulations.
Sicherheit von Maschinen - Ortsfeste Zugänge zu maschinellen Anlagen - Teil 1: Wahl eines ortsfesten Zugangs zwischen zwei Ebenen (ISO 14122-1:2001)
Diese Norm gilt für alle Maschinen (stationäre und mobile), für die ortsfeste Zugänge erforderlich sind. Diese Norm gilt für Zugänge, die Bestandteil einer Maschine sind. Diese Norm kann auch für Zugänge angewendet werden, die Teil des Gebäudes sind (z.B. Arbeitsbühnen, Laufstege, Steigleitern) in dem die Maschine aufgestellt ist, wobei die Hauptfunktion dieses Gebäudeteils darin besteht, den Zugang zu der Maschine zu ermöglichen. ANMERKUNG: Diese Norm darf auch unter anderen Nutzungsverhältnissen angewendet werden, jedoch unter Beachtung der nationalen Vorschriften.
Sécurité des machines - Moyens d'acces permanents aux machines - Partie 1: Choix d'un moyen d'acces fixe entre deux niveaux (ISO 14122-1:2001)
La présente norme s'applique a toutes les machines (fixes ou mobiles) ou des moyens d'acces fixes sont nécessaires. La présente norme s'applique aux moyens d'acces fixes qui font partie intégrante d'une machine. La présente norme peut s'appliquer également aux moyens d'acces aux parties du bâtiment (par exemple plateformes de travail, passerelles, échelles) ou la machine est installée a condition que la fonction principale de cette partie du bâtiment est de donner acces a la machine. NOTE Cette norme peut etre utilisée dans d'autres conditions sous réserve de respecter les réglementations nationales.
Varnost strojev - Stalni dostopi do strojev in postrojenj - 1. del: Izbira fiksnega dostopa med dvema nivojema (ISO 14122-1:2001)
Velja za stroje (stacionarne in mobilne), kadar so potrebni fiksni načini dostopa. Prav tako lahko velja za način dostopa do tega dela zgradbe, kjer je stroj postavljen, če je glavna funkcija tega dela zgradbe zagotoviti način dostopa da stroja. Prav tako velja za načine dostopa do stroja, ki niso stalno pritrjene do stroja in katere je lahko odstraniti ali premakniti na stran na nekatera delovanja stroja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14122-1:2002
01-november-2002
Varnost strojev - Stalni dostopi do strojev in postrojenj - 1. del: Izbira fiksnega
dostopa med dvema nivojema (ISO 14122-1:2001)
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed
means of access between two levels (ISO 14122-1:2001)
Sicherheit von Maschinen - Ortsfeste Zugänge zu maschinellen Anlagen - Teil 1: Wahl
eines ortsfesten Zugangs zwischen zwei Ebenen (ISO 14122-1:2001)
Sécurité des machines - Moyens d'acces permanents aux machines - Partie 1: Choix
d'un moyen d'acces fixe entre deux niveaux (ISO 14122-1:2001)
Ta slovenski standard je istoveten z: EN ISO 14122-1:2001
ICS:
13.110 Varnost strojev Safety of machinery
SIST EN ISO 14122-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14122-1:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 14122-1:2002
EUROPEAN STANDARD
EN ISO 14122-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2001
ICS 13.110
English version
Safety of machinery - Permanent means of access to machinery
- Part 1: Choice of fixed means of access between two levels
(ISO 14122-1:2001)
Sécurité des machines - Moyens d'accès permanents aux Sicherheit von Maschinen - Ortsfeste Zugänge zu
machines - Partie 1: Choix d'un moyen d'accès fixe entre maschinellen Anlagen - Teil 1: Wahl eines ortsfesten
deux niveaux (ISO 14122-1:2001) Zugangs zwischen zwei Ebenen (ISO 14122-1:2001)
This European Standard was approved by CEN on 14 February 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14122-1:2001 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14122-1:2002
Page 2
EN ISO 14122-1:2001
Contents
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Significant hazards .7
5 Requirements for the selection of the fixed means of access.7
5.1 General.7
5.2 Preferred means of access .8
5.3 Selection of the means of access .8
5.3.1 Basic solutions.8
5.3.2 Conditions for the selection of stepladder or ladder .8
5.4 Selection between lift, ramp or stair .9
5.5 Selection between stepladder and ladder .10
6 Assembly instructions .11
Annex A (informative) Examples of the possible changes in the machine or system to make a better
access possible.12
Annex ZA (informative) Relationship of this European standard with EC directives .13
Bibliography .14
---------------------- Page: 4 ----------------------
SIST EN ISO 14122-1:2002
Page 3
EN ISO 14122-1:2001
Foreword
The text of EN ISO 14122-1:2001 has been prepared by Technical Committee CEN/TC 114 "Safety of machinery",
the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 199 "Safety of
machinery".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn at the latest
by November 2001.
This European Standard has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN ISO 14122-1:2002
Page 4
EN ISO 14122-1:2001
Introduction
EN ISO 14122 consists of the following parts, under the general title "Safety of machinery - Permanent means of
access to machinery" :
Part 1 : Choice of a fixed means of access between two levels
Part 2 : Working platforms and walkways
Part 3 : Stairs, stepladders and guard-rails
Part 4 : Fixed ladders.
This part of EN ISO 14122 is a type B standard as stated in EN 1070.
This document is to be read in conjunction with clause 1.6.2 "Access to operating position and servicing points"
and 1.5.15 "Risk of slipping, tripping or falling" of the essential safety requirements expressed in annex A of
EN 292-2:1991/A1:1995. See also 6.2.4 "Provision for safe access to machinery" of EN 292-2:1991.
For the significant hazards covered by this part of EN ISO 14122, see clause 4.
The provisions of this document may be supplemented or modified by a type C standard.
NOTE 1 For machines which are covered by the scope of a type C standard and which have been designed and built
according to the provisions of that standard, the provisions of that type C standard take precedence over the provisions of this
type B standard. "
NOTE 2 The use of materials other than metals (wood composite materials, so-called "advanced" materials, etc.) does not
alter the application of this part of EN ISO 14122.
Annexes A and ZA are for information only.
This part of EN ISO 14122 contains a Bibliography.
---------------------- Page: 6 ----------------------
SIST EN ISO 14122-1:2002
Page 5
EN ISO 14122-1:2001
1 Scope
EN ISO 14122 defines the general requirements for safe access to machines mentioned in EN 292-2. Part 1 of
EN ISO 14122 gives advice about the correct choice of access means when the necessary access to the machine
is not possible directly from the ground level or from a floor.
This part of EN ISO 14122 applies to all machinery (stationary and mobile) where fixed means of access are
necessary.
This part of EN ISO 14122 applies to means of access which are a part of a machine.
This part of EN ISO 14122 may also apply to means of access to that part of the building (e.g. working platforms,
walkways, ladders) where the machine is installed, providing the main function of that part of the building is to
provide a means of access to the machine.
NOTE This part of EN ISO 14122 may be used also for means of access which are outside the scope of this part of
EN ISO 14122. In those cases the possible relevant national or other regulations should be taken into account.
This part of EN ISO 14122 applies also to access means specific to the machine which are not permanently fixed to
the machine and which may be removed or moved to the side for some operations of the machine (e.g. changing
tools in a large press).
This part of EN ISO 14122 does not apply to lifts, to moveable elevating platforms or other devices specially
designed to lift persons between two levels
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 292—1:1991 (ISO/TR 12100-1), Safety of machinery — Basic concepts, general principles for design — Part
1 : Basic terminology, methodology
EN 292-2/A1 (ISO/TR 12100-2), Safety of machinery — Basic concepts, general principles for design — Part 2 :
Technical principles and specifications
EN 1050 (ISO 14121), Safety of machinery — Principles for risk assessment
EN 1070, Safety of machinery — Terminology
EN ISO 14122-2, Safety of machinery — Permanents means of access to machinery — Part 2: Working platforms
and walkways
EN ISO 14122-3, Safety of machinery — Permanents means of access to machinery — Part 3: Stairs, stepladders
and guard-rails
prEN ISO 14122-4:1996, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed
ladders
3 Terms and definitions
For the purposes of this part of EN ISO 14122, the terms and definitions stated in EN 1070 "Safety of machinery -
Terminology" and the following terms and definitions apply (see also Figure 5).
---------------------- Page: 7 ----------------------
SIST EN ISO 14122-1:2002
Page 6
EN ISO 14122-1:2001
3.1
ladder
fixed means of access with an angle of pitch from more than 75 ° to 90 °, whose horizontal elements are rungs (see
Figure 1)
Figure 1 — 75° < angle of pitch 90°
3.2
stepladder
fixed means of access with an angle of pitch from more than 45 ° up to 75 °, whose horizontal elements are steps
(see Figure 2)
Figure 2 — 45° < slope angle 75°
3.3
stair
fixed means of access with an angle of pitch from more than 20 ° up to 45 °, whose horizontal elements are steps
(see Figure 3)
Figure 3 — 20° < angle of pitch 45°
---------------------- Page: 8 ----------------------
SIST EN ISO 14122-1:2002
Page 7
EN ISO 14122-1:2001
3.4
ramp
fixed means of access, comprising a continuous inclined plane having an angle of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.