HD 123.4 S1:1977
(Main)Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
Contains a detailed description of flanges for circular waveguides - Type J, including mechanical requirements, electrical tests and a table drawn up in inches and millimeters.
Metallische Hohlleiter - Teil 4: Allgemeine Empfehlungen für Rundhohlleiter
Guides d'ondes métalliques creux - Partie 4: Spécifications particulières pour les guides d'ondes circulaires
Contient une description détaillée des guides d'ondes circulaires - type J, comprenant les prescriptions mécaniques, les essais électriques, ainsi qu'un tableau de dimensions rédigé en inches et en millimètres.
Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST HD 123.4 S1:2002
prva izdaja
STANDARD
september 2002
Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
ICS 33.120.10 Referenčna številka
SIST HD 123.4 S1:2002(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
NORME CEI
INTERNATIONALE IEC
60153-4
INTERNATIONAL
Deuxième édition
STAN
DARD
Second edition
1973-01
Guides d'ondes métalliques creux
Quatrième partie:
Spécifications particulières pour les guides
d'ondes circulaires
Hollow metallic waveguides
Part 4:
Relevant specifications for circular waveguides
© IEC 1973
Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie de
cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique,
y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
K
PRICE CODE
International Electrotechnical Commission
IEC
Me»iuyHapogHaa 3nenrporexHHVecnaR HOMHCCHn
Pour prix, voir catalogue en vigueur
•
For price, see current catalogue
---------------------- Page: 2 ----------------------
CONTENTS
Page
5
FOREWORD
5
PREFACE
Clause
ll
1 General
11
1.1 Standardized types
11
1.2 Type designation
11
1.3 Frequency range
Mechanical requirements 1 I
2.
2.1 Dimensions 11
2.2 Other mechanical requirements 15
17
3. Electrical tests
17
3.1 Attenuation
17
4. Additional tests
17
4.1 Gastightness
18
TABLE la (in mm)
19
TABLE la (in inches)
20
TABLE lb
---------------------- Page: 3 ----------------------
INTERNATIONAL ELECTROTECHNICAL COMMISSION
HOLLOW METALLIC WAVEGUIDES
Part 4: Relevant specifications for circular waveguides
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the
1)
National Committees having a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National Committees in that
2)
sense.
In order to promote international unification, the IEC expresses the wish that all National Committees should adopt
3)
the text of the I EC recommendation for their national rules in so far as national conditions will permit. Any divergence
between the IEC recommendations and the corresponding national rules should, as far as possible, be clearly
indicated in the latter.
PREFACE
This publication was prepared by Sub-Committee 46B, Waveguides and their Accessories, of
Technical Committee No. 46, Cables, Wires and Waveguides for Telecommunication Equipment.
It contains Part 4: Relevant Specifications for Circular Waveguides, of the complete IEC recom-
mendation for hollow metallic waveguides, and it is intended to be used in conjunction with Part 1,
General Requirements and Measuring Methods, which is issued as IEC Publication 153-1.
Detail specifications for other types of waveguide are issued in companion publications.
The amendments and supplements contained in this second edition of Publication 153-4 have been
approved in several Six Months' Rule documents.
were discussed at meetings in Baden-Baden in June 1965, in London in
The amendments to Table Ia
September 1968 and in The Hague in November 1970. The resulting drafts were submitted to the National
Committees for approval under the Six Months' Rule as follows:
Document 46B(Central Office)25, circulated in November 1965
Document 46B(Central Office)46, circulated in September 1969
Document 46B(Central Office)49, circulated in April 1971.
---------------------- Page: 4 ----------------------
The following countries voted explicitly in favour of publication:
Document Document Document
46B(Central Office)25 46B(Central Office)46 46B(Central Office)49
Australia Australia Australia
Belgium
Belgium Belgium
Denmark Czechoslovakia Czechoslovakia
France Denmark Denmark
Germany Germany France
Israel Israel Germany
Italy Italy Iran
Japan Japan Israel
Netherlands Netherlands Italy
Norway Poland Japan
Sweden Romania Korea (Democratic People's
Switzerland South Africa Republic of)
Turkey Sweden Netherlands
United Kingdom Switzerland Poland
United States of America Turkey Portugal
United Kingdom Sweden
United States of America Switzerland
Turkey
United Kingdom
United States of America
The amendments to Table lb were reviewed by
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.