FprEN IEC 62275:2022

Cable management systems - Cable ties for electrical installations

IEC 62275:2022 specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices as a means used for managing or securing the wiring systems in electrical installations. Cable ties and associated fixing devices can also be suitable for other applications, such as support of wiring systems, and where so used, additional requirements can apply. This fourth edition cancels and replaces the third edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - scope clarification, - new definitions, - deletion of the exception for the stabilization of the moisture content, - possibility to carry out tensile strength tests with dead weights, - differentiation of rubber and acrylic adhesive fixings, - clarification for mechanical testing of integral devices, - clarifications on Table 6, - clarifications in 9.1, - the minimum installation temperature test for cable ties is carried out only when the declared minimum temperature is lower than 0 °C, - a requirement that metallic cable ties be classified according to 6.2.3, - definition of colours to be tested for contribution to fire, - addition of a "some countries" note in Clause 10, - clarification of the mounting of fixing devices in the resistance to ultraviolet light test, - clarification on the testing of integral devices in the resistance to ultraviolet light test.

Kabelführungssysteme - Kabelbinder für elektrische Installationen

Systèmes de câblage - Colliers pour installations électriques

L'IEC 62275:2022 spécifie les exigences pour les colliers métalliques, non métalliques et composites, ainsi que pour leurs accessoires de fixation associés, comme un moyen utilisé pour l’aménagement et la fixation des systèmes de câblage dans les installations électriques. Les colliers et leurs accessoires de fixation associés peuvent également être utilisés pour d’autres applications, comme le soutien des systèmes de câblage et, dans ce cas, des exigences supplémentaires peuvent s’appliquer. Cette quatrième édition annule et remplace la troisième édition parue en 2018. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: - une clarification du domaine d’application; - de nouvelles définitions; - la suppression de l’exception relative au conditionnement pour atteindre la reprise d’humidité; - la possibilité d’effectuer des essais de tenue à la traction avec des poids morts; - la différenciation des fixations adhésives en caoutchouc et en acrylique; - une clarification pour les essais mécaniques des accessoires intégrés; - des clarifications du Tableau 6; - des clarifications de 9.1; - l’essai des colliers à la température minimale d’installation est effectué uniquement lorsque la température minimale déclarée est inférieure à 0 °C; - une exigence selon laquelle les colliers métalliques sont classés conformément à 6.2.3; - la définition des couleurs à soumettre à essai en matière de contribution au feu; - l’ajout d’une note "Dans certains pays" à l’Article 10; - la clarification du montage des accessoires de fixation dans l’essai de tenue au rayonnement ultraviolet; - la clarification de l’essai des accessoires intégrés dans l’essai de tenue au rayonnement ultraviolet.

Sistemi za urejanje pokabljenja - Kabelske vezice za električne inštalacije

General Information

• Status: Not Published
• Publication Date: 29-Jan-2023
• ICS: 29.120.10 - Conduits for electrical purposes
• ICS: 29.120.99 - Other electrical accessories
• Technical Committee: CLC/TC 213 - Cable management systems
• Drafting Committee: IEC/SC 23A - IEC_SC_23A
• Current Stage: 5060 - Voting results sent to TC, SR - Formal Approval
• Start Date: 28-Oct-2022
• Completion Date: 28-Oct-2022
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: kSIST FprEN IEC 62275:2022 - Cable management systems - Cable ties for electrical installations

Relations

• Revises: EN IEC 62275:2019 - Cable management systems - Cable ties for electrical installations
• Effective Date: 29-Jun-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62275:2022
01-april-2022
Sistemi za urejanje pokabljenja - Kabelske vezice za električne inštalacije
Cable management systems - Cable ties for electrical installations
Kabelführungssysteme - Kabelbinder für elektrische Installationen
Systèmes de câblage - Colliers pour installations électriques
Ta slovenski standard je istoveten z: prEN IEC 62275:2022
ICS:
29.120.99 Druga električna dodatna Other electrical accessories
oprema
oSIST prEN IEC 62275:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62275:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62275:2022
23A/994/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62275 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-28 2022-04-22
SUPERSEDES DOCUMENTS:
23A/963/CD, 23A/978A/CC

IEC SC 23A : CABLE MANAGEMENT SYSTEMS
SECRETARIAT: SECRETARY:
United Kingdom Mr Rajeev Vagdia
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Cable management systems - Cable ties for electrical installations

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any
part of it, for any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62275:2022
IEC CDV 62275 © IEC 2021 2 23A/994/CDV

1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 4
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 6
7 4 General requirements . 8
8 5 General notes on tests . 8
9 6 Classification . 13
10 6.1 According to material . 13
11 6.1.1 Metallic component . 13
12 6.1.2 Non-metallic component . 13
13 6.1.3 Composite component . 13
14 6.2 According to loop tensile strength for cable ties and mechanical strength for
15 fixing devices . 13
16 6.2.1 Loop tensile strength for cable ties . 13
17 6.2.2 Type 1 – Retains at least 50 % of declared loop tensile strength for
18 cable ties and mechanical strength for fixing devices after test
19 conditions . 13
20 6.2.3 Type 2 – Retains 100 % declared loop tensile strength for cable ties
21 and mechanical strength for fixing devices after test conditions . 13
22 6.2.4 According
...