This document applies to interconnections between intrusion and hold-up alarm system components using specific or non-specific wired interconnections (e.g. between SPT and CIE). The interconnected components are located within the supervised premises, or mounted on the outside of the supervised premises (e.g. external warning devices).
This document does not apply to interconnections between components located within the same enclosure, or to interconnections between parts of an I&HAS component...
view more

    • sale 10% off
    • Technical specification
      26 pages
      English language
    • e-Library read for
      1 day

This document specifies the material, mechanical and functional (fitness for purpose) requirements for warning devices with visual characteristics manufactured from plastics, intended to indicate the presence of cables and piping systems buried in ground when opening trenches and more generally during digging work.
This document also specifies the test methods referred to in this document.
This document is applicable to two types of visual warning devices: tapes (type 1) and meshes (type 2).

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document provides a methodology and test procedures to be able to declare and verify
the detection area for motion detectors using passive infrared technology in electronic control
devices and appliance switches, whether stand-alone (direct control of one or more
applications) or as part of home and building electronic systems or building automation
control systems (HBES/BACS) or similar.
It also provides a uniform way to present the test results.
The purpose of these detectors is to ...
view more

    • sale 10% off
    • Standard
      31 pages
      English language
    • e-Library read for
      1 day

This document specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a Supervised Premises Transceiver and a Receiving Centre Transceiver using the Internet Protocol (IP).
The protocol is intended for use over any network that supports the transmission of IP data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX.
The system performance characteristics for alarm transmission are specified in EN 50136-1.
The performance c...
view more

    • sale 10% off
    • Technical specification
      54 pages
      English language
    • e-Library read for
      1 day

IEC 60839-11-5 specifies the Open supervised device protocol (OSDP) for electronicaccess control systems. This includes communication settings, commands and repliesbetween the ACU and the peripheral devices. It also includes a mapping of mandatory andoptional requirements as per IEC 60839-11-1:2013 as covered by Annex F.This document applies to physical security only. Physical security prevents unauthorizedpersonnel, attackers or accidental intruders from physically accessing a building, room, e...view more

    • sale 10% off
    • Standard
      88 pages
      English language
    • e-Library read for
      1 day

This document is for combined passive infrared and microwave detectors installed in buildings and provides for security Grades 1 to 4 (see EN 50131-1), specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV (see EN 50130-5). This document does not include requirements for detectors intended for use outdoors.
The purpose of the detector is to detect the broad spectrum infrared radiation emitted by an intruder, to emit microwave signals and analyse the signa...
view more

    • sale 10% off
    • Standard
      54 pages
      English language
    • e-Library read for
      1 day

This document defines the following elements for urban rail rolling stock:
-   the functional requirements for a communication device between passengers and driver or Operations Control Centre (OCC);
-   the dynamic behaviour of the Communication device.
This document is applicable to the categories I to III of Urban Rail rolling stock defined in CEN/CLC Guide 26:
-   (I) Metros;
-   (II) Trams;
-   (III) Light Rail.
NOTE 1   CEN/CLC Guide 26 defines Metro, Tram and Light Rail as public transport sys...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for Intrusion and Hold-up Alarm Systems installed in buildings using
specific or non-specific wired interconnections or wire-free interconnections. These requirements also apply to the
components of an I&HAS installed in a building which are normally mounted on the external structure of a building e.g.
ancillary control equipment or warning devices. The standard does not include requirements for exterior I&HAS.
This standard specifies perform...
view more

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day

IEC 60839-11-5:2020 specifies the Open supervised device protocol (OSDP) for electronic access control systems. This includes communication settings, commands and replies between the ACU and the peripheral devices. It also includes a mapping of mandatory and optional requirements as per IEC 60839-11-1:2013 as covered by Annex.
This document applies to physical security only. Physical security prevents unauthorized personnel, attackers or accidental intruders from physically accessing a building...
view more

    • sale 15% off
    • Standard
      85 pages
      English language
    • sale 10% off
    • Technical report
      35 pages
      English language
    • e-Library read for
      1 day

This Technical Specification 'Service model for social care alarms', provides a framework and recommendations for the roles and responsibilities of the different actors in the social care alarm service chain.
The following topics are included in this technical specification:
1. Service user perspective: objectives, roles, needs and processes
2. Process description on service chain, including:
- service user experience, instruction and installation, use, service accessibility, response ar...
view more

    • sale 10% off
    • Technical specification
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      31 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for pyrotechnic obscuration security devices as a part of an I&HAS. It covers application and performance and also specifies the necessary tests and trials to ensure efficiency and reliability of such obscuration devices.
This European Standard is not intended to cover standalone or vehicular security pyrotechnic obscuration security device.
This European Standard also gives guidelines on the criteria for design, installation, operation and maintenance ...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for portable locating leak detectors and fixed gas detectors for all refrigerants.
Locating detectors used in factories for manufacturing processes are not included in the Scope of prEN 14624.
1.1   Product application:
This document applies to different applications and environments such as plant and machine rooms, production rooms, cold rooms, supermarkets, occupied spaces like offices and hotels.
1.2   Product performance:
This document specifies mini...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011).
This European Standard specifies the requirements and performance criteria, the corresponding te...
view more

    • sale 10% off
    • Standard
      74 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics of the Passenger Alarm System (PAS) for Urban Rail.
This document covers the PAS fitted to the passenger carrying Urban Rail rolling stock and specifies:
-   the safety related requirements;
-   the functional requirements of PAS triggered by pasasengers;
-   the requirements for the communication channel between passengers and the driver or OCC;
-   the requirements for the functional behaviour of the PAS;
-   the requirements for the degraded modes manag...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics of the Passenger Alarm System (PAS) for Urban Rail.
This document covers the PAS fitted to the passenger carrying Urban Rail rolling stock and specifies:
- the safety related requirements;
- the functional requirements of PAS triggered by passengers;
- the requirements for the communication channel between passengers and the driver or Operations Control Centre (OCC);
- the requirements for the functional behaviour of the PAS;
- the requirements f...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed apparatus for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v). The apparatus, or parts thereof, may be intended for use in potentially explosive atmospheres (see 4.1) and in mines susceptible to firedamp. In the case of inert gas purging (inertization), it applies also to apparatus w...view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This document will define test methods and performance requirements for all electrical equipment used for the detection of the refrigerant gases as defined in EN 378 1 as well as SF6 by means of concentration measurement.
NOTE 1   For the purposes of this standard, the term “refrigerant gases” includes refrigerant gases defined in EN 378 1 as well as SF6.
This document specifies general requirements for the construction, testing and performance of electrically operated refrigerant gas detection ...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for compatibility and connectability assessment of components of fire detection and fire alarm system or voice alarm system as a subsystem of fire detection and fire alarm system. The components comply either with the requirements of EN 54 or with a manufacturer’s specification where there is no EN 54 standard. This document only includes system requirements when these are necessary for compatibility assessment.
This document covers transmission path onl...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for the construction, testing and performance of electrically operated refrigerant fixed gas detection equipment in safety applications. This document will not specify requirements for portable locating leak detectors for refrigerant application as already covered by EN 14624:2012. This document is applicable to equipment whose primary purpose is to provide an indication, alarm and/or other output function to warn of the presence of refrigerant gases ...view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

This standard applies to alarming radiation detection instruments that are pocket-sized, carried on the body and used to detect and indicate the presence and general magnitude of gamma radiation fields. Neutron detection may also be provided.
Personal Radiation Devices (PRDs) alert the user to the presence of a source of radiation that is distinctly above the measured average local background radiation level. They are not intended to provide a measurement of the ambient or personal dose equival...
view more

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v). The equipment, or parts thereof, may be intended for use in explosive atmospheres (see 4.1) and in mines susceptible to firedamp. This document applies to equipment intended for monitoring oxygen deficiency and enrichment. EXAMPLE Monit...view more

    • sale 10% off
    • Standard
      37 pages
      English language
    • e-Library read for
      1 day

This Standard specifies the web service interface for the configuration of the recording of video, audio and metadata. Additionally, associated events are defined. Clause 4 provides a definition of the storage model this document is based on. Web service usage is outside the scope of this document. Please refer to the IEC 60839-11- 31 for more information.

    • sale 10% off
    • Standard
      113 pages
      English language
    • e-Library read for
      1 day

This Standard defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and receivers from different manufacturers using common and well-defined interfaces. These interfaces cover functions such as media and imaging configuration, real-time streaming of audio and video, pan, tilt and zoom (PTZ) control as well as analytics. The management and control interfaces def...view more

    • sale 10% off
    • Standard
      287 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as an integrated part of the total fire safety and security solution.
For the purpose of this standard, the term “alarm” is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed fire...
view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft.
NOTE   For caravan holiday homes EN 50291-1 applies.
This European Standard specifies apparatus designed to operate in the event of an escape of carbon monoxide and to provide a visual and audible alarms only ...
view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements for the construction, testing and performance of electrically operated carbon monoxide gas detection apparatus, designed for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. NOTE For caravan holiday homes EN 50291-1 applies. This European Standard specifies apparatus designed to operate in the event of an escape of carbon monoxide and to provide a visual and audible alarms only (T...view more

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day

IEC 62676-2-32:2019 specifies the web service interface for the configuration of the recording of video, audio and metadata. Additionally, associated events are defined. Web service usage is outside the scope of this document. Please refer to the IEC 60839‑11-31 for more information. This first edition, together with IEC 60839-11-31 and IEC 62676-2-31, cancels and replaces IEC 62676-2-3:2013. This edition includes the following significant technical changes with respect to IEC 62676-2-3:2013: a)...view more

    • sale 10% off
    • Standard
      113 pages
      English language
    • e-Library read for
      1 day

IEC 62676-2-31:2019 defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and receivers from different manufacturers using common and well-defined interfaces. These interfaces cover functions such as media and imaging configuration, real-time streaming of audio and video, pan, tilt and zoom (PTZ) control as well as analytics. The management and control interfac...view more

    • sale 10% off
    • Standard
      287 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the minimum requirements for monitoring, receiving and processing of alarm messages generated by alarm systems taking place as a part of the total fire, safety and security solution. For the purpose of this standard, the term "alarm" is used in the broad sense to include fault, status and other messages received from one or more of a range of safety and security alarm systems such as but not limited to fire detection and fire alarm systems, fixed fire fighting sy...view more

    • sale 10% off
    • Standard
      44 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements for Security Fog Devices connected to an I&HAS. It covers application and performance and also gives the necessary tests and trials to ensure efficiency and reliability of such obscuration devices.
This European Standard also gives guidance on the criteria for design, installation, operation and maintenance of Security Fog Devices.
A Security Fog Device is not considered to be a component of an I&HAS and no requirements are given relating to th...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This European Standard includes requirements for warning devices used for notification in intrusion and hold up alarm systems installed in buildings. Four grades of warning device are described corresponding to each of the four security grades given in EN 50131-1. Requirements are also given for four environmental classes covering applications in indoor and outdoor locations as specified in EN 50130-5.
This European Standard does not deal with requirements for compliance with EC regulatory Dire...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

IEC 62676-2-32:2019 specifies the web service interface for the configuration of the recording of video, audio and metadata. Additionally, associated events are defined.
Web service usage is outside the scope of this document. Please refer to the IEC 60839‑11-31 for more information.
This first edition, together with IEC 60839-11-31 and IEC 62676-2-31, cancels and replaces IEC 62676-2-3:2013. This edition includes the following significant technical changes with respect to IEC 62676-2-3:2013:
...
view more

    • sale 15% off
    • Standard
      224 pages
      English and French language

IEC 62676-2-31:2019 defines procedures for communication between network video clients and video transmitter devices. This new set of specifications makes it possible to build network video systems with devices and receivers from different manufacturers using common and well-defined interfaces.
These interfaces cover functions such as media and imaging configuration, real-time streaming of audio and video, pan, tilt and zoom (PTZ) control as well as analytics.
The management and control interf...
view more

    • sale 15% off
    • Standard
      577 pages
      English and French language

This document specifies test methods and performance requirements for electrical apparatus for the detection of
combustible gases designed for continuous operation in a fixed installation in recreational vehicles and similar
premises.
NOTE 1 For caravan holiday homes EN 50194-1 applies.
This document specifies apparatus designed to operate in the event of an escape of liquefied petroleum gas (LPG)
and/or petrol (gasoline) vapour and to provide a visual and audible alarm and an executive act...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements, test methods and performance criteria for fire alarm sounders, including voice sounders, in a fixed installation intended to signal an audible warning between the fire detection and fire alarm systems and the occupants of a building (see EN 54-1:2011).
This European Standard provides for the assessment and verification of constancy of performance (AVCP) of fire alarm sounders to this EN.
This European Standard is not intended to cover:
a)   lou...
view more

    • sale 10% off
    • Standard
      67 pages
      English language
    • e-Library read for
      1 day

IEC 60839-7-8:2019 specifies a protocol for point-to-point transmission of alarms and faults, as well as communications monitoring, between a supervised premises transceiver and a receiving centre transceiver using the Internet protocol (IP).
The protocol is intended for use over any network that supports the transmission of IP data. These include Ethernet, xDSL, GPRS, WiFi, UMTS and WIMAX.
The system performance characteristics for alarm transmission are specified in IEC 60839‑5‑1.
The perfo...
view more

    • sale 15% off
    • Technical specification
      52 pages
      English language

This document specifies test methods and performance requirements for electrical apparatus for the detection of
combustible gases designed for continuous operation in a fixed installation in recreational vehicles and similar
premises.
NOTE 1 For caravan holiday homes EN 50194-1 applies.
This document specifies apparatus designed to operate in the event of an escape of liquefied petroleum gas (LPG)
and/or petrol (gasoline) vapour and to provide a visual and audible alarm and an executive act...
view more

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for Security Fog Devices as part of an I&HAS. It covers application and performance and also gives the necessary tests and trials to ensure efficiency and reliability of such obscuration devices. This document also gives guidance on the criteria for design, installation, operation and maintenance of Security Fog Devices.

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This document includes requirements for warning devices used for notification in intrusion and hold up alarm systems installed in buildings. Four grades of warning device are described corresponding to each of the four security grades given in EN 50131-1. Requirements are also given for four environmental classes covering applications in indoor and outdoor locations as specified in EN 50130-5. This document does not deal with requirements for compliance with EC regulatory Directives, such as the...view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to alarm systems for all types of passenger and goods passenger lifts, in particular those covered in the EN 81 series.
This European Standard also deals with the minimum information to be provided as part of the instruction manual related to maintenance and the rescue service.
This European Standard deals with the following significant hazard relevant to lifts when they are used as intended and under the conditions foreseen by the installer/manufacturer:
-   entr...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This European Standard applies to alarm systems for all types of passenger and goods passenger lifts, in particular those covered in the EN 81 series.
This European Standard also deals with the minimum information to be provided as part of the instruction manual related to maintenance and the rescue service.
This European Standard deals with the following significant hazard relevant to lifts when they are used as intended and under the conditions foreseen by the installer/manufacturer:
-   entr...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day

This Technical Specification provides guidelines for the application of automatic fire detection and fire alarm systems in and around buildings. The guideline covers planning, design, installation, commissioning, use and maintenance of the systems.
The guidelines cover systems intended for the protection of life and/or the protection of property. The guidelines cover systems with a control and indicating equipment and at least one manual call point or one fire detector. In the event of a fire t...
view more

    • sale 10% off
    • Technical specification
      90 pages
      English language
    • e-Library read for
      1 day

This standard specifies the requirements for the performance, reliability and security characteristics of alarm transmission systems.
It covers the general requirements for connections providing signalling between an alarm system at a supervised premises and annunciation equipment at an alarm receiving centre.
EN 50136-1 Applies to transmission systems for all types of alarm messages such as fire, intrusion, access control, social alarm, etc. Different types of alarm system may in addition to ...
view more

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

This draft European Standard specifies requirements, test methods and performance criteria for point smoke detectors that operate using scattered light, transmitted light or ionization, intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54 1:2011).
This European standard provides for the assessment of verification of consistency of performance (AVCP) of point smoke detectors to this EN.
For other types of smoke detector, or smoke detectors worki...
view more

    • sale 10% off
    • Standard
      79 pages
      English language
    • e-Library read for
      1 day

This standard specifies the requirements for the performance, reliability and security characteristics of alarm transmission systems. It covers the general requirements for connections providing signalling between an alarm system at a supervised premises and annunciation equipment at an alarm receiving centre. EN 50136-1 Applies to transmission systems for all types of alarm messages such as fire, intrusion, access control, social alarm, etc. Different types of alarm system may in addition to al...view more

    • sale 10% off
    • Amendment
      9 pages
      English language
    • e-Library read for
      1 day

This Technical Specification specifies a protocol for point-to-point transmission of alarms, faults, control signals and communications monitoring, between a Local Unit and Controller and an Alarm Receiving Centre using the Internet protocol (IP). The protocol is intended for use over any network that supports the transmission of IP data with sufficient quality of service to support VoIP or a separate voice channel.
The Alarm Protocol is defined as an XML scheme including the alarm types, codes...
view more

    • sale 10% off
    • Technical specification
      41 pages
      English language
    • e-Library read for
      1 day

This European Standard provides for security grades 1 to 4, (see EN 50131-1) specific or non-specific wired or wire-free lock state contacts, and includes the requirements for four environmental classes covering applications in internal and outdoor locations as specified in EN 50130-5.
Lock state contacts are installed in windows or doors and windows or doorframes to allow to monitor the lock/unlock status only or the lock/unlock status combined with the open/close status of a window/door simul...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements, test methods and performance criteria for point heat detectors intended for use in fire detection and fire alarm systems installed in and around buildings (see EN 54-1:2011).
This European Standard provides for the assessment of verification of constancy of performance (AVCP) of point heat detectors to this EN.
For other types of heat detector, or for detectors intended for use in other environments, this standard should only be used for guida...
view more

    • sale 10% off
    • Standard
      62 pages
      English language
    • e-Library read for
      1 day

This European Standard provides for security grades 1 to 4, (see EN 50131-1) specific or non-specific wired or wire-free lock state contacts, and includes the requirements for four environmental classes covering applications in internal and outdoor locations as specified in EN 50130-5. Lock state contacts are installed in windows or doors and windows or doorframes to allow to monitor the lock/unlock status only or the lock/unlock status combined with the open/close status of a window/door simult...view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day