IEC TS 63105:2021(E) establishes terms and definitions in the field of lighting systems and related equipment.
Terminological literature for other fields of lighting is listed in the bibliography.

    • sale 15% off
    • Technical specification
      9 pages
      English language

This document describes the method of measuring, evaluating and specifying the UV irradiation
characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes.
It includes specific requirements regarding the marking of such lamps.
These requirements relate only to type testing.
Lamps complying with the requirements of this document comply with the electrical and
mechanical safety requirements of IEC 61195 and IEC 61199 with the exception of the
requirements...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

IEC 61228:2020 is available as IEC 61228:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61228:2020 describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This third edition cancels and replaces...
view more

    • sale 15% off
    • Standard
      38 pages
      English and French language

This document specifies methods of measurement of electrical power consumption in nonactive
mode(s), as applicable for electrical lighting equipment. This includes electrical lighting
equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC
or up to 1 000 V AC.
This document is intended to be referenced by lighting ...
view more

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

IEC 63103:2020(E) specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC or up to 1 000 V AC.
This document is intended to be referenced by lightin...
view more

    • sale 15% off
    • Standard
      33 pages
      English language

IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current of single and/or multiple lighting products of the same type. Lighting products include the following:
light sources with integrated controlgear,
controlgear,
luminaires.

    • sale 15% off
    • Standard
      37 pages
      English and French language

IEC 61547:2020 is available as IEC 61547:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61547:2020 which deals with electromagnetic immunity requirements, applies to lighting equipment which is within the scope of IEC technical committee 34, including apparatus such as lamps, luminaires, and modules. This third edition cancels and replaces the second edition, published in 2009. This ed...
view more

    • sale 15% off
    • Standard
      41 pages
      English and French language

IEC TR 63139:2018(E) is related to the insulation coordination in TC 34 standards and provides explanations on mathematical addition of working voltages, insulation between circuits, use of protective extra low voltage (PELV) and insulation between LV supply and control line conductors in order to cover new technologies associated with the use of LED light sources and controllable products.
It describes in which way the addition of supply voltages and working voltages can be arranged for an ass...
view more

    • sale 15% off
    • Technical report
      20 pages
      English language

IEC TR 63130:2018(E) describes the current state of experts’ opinions on the standardization of metal halide lamps to cover the relevant parameters for hot restrike and for dimming in combination with low frequency square wave ballasts. It provides guidelines for supplementing or modifying IEC 61167 in order that these conditions are covered.

    • sale 15% off
    • Technical report
      14 pages
      English language

IEC PAS 63166:2018(E) This book 7 defines several LED modules. Each LED module has a rectangular shape and the only restriction to the light emitting surface is that no light is emitted in the direction of the reference plane of the LED module.
This Book 1 defines the common concepts that underlie the Zhaga interface specifications. In addition, this Book 1 specifies general requirements for Zhaga compliant LED Light Engines, associated components and Luminaires.

    • sale 15% off
    • Technical specification
      97 pages
      English language

IEC TR 63158:2018(E) describes an objective stroboscopic effect visibility (SVM) meter, which can be applied for performance testing of lighting equipment under different operational conditions.
The stroboscopic effects considered in this document are limited to the objective assessment by a human observer of visible stroboscopic effects of temporal light modulation of lighting equipment in general indoor applications, with typical indoor light levels (> 100 lx) and with moderate movements of a...
view more

    • sale 15% off
    • Technical report
      35 pages
      English language

This European Standard specifies the required data for lamps and luminaires for the verification of conformity to the requirements of EN 12464-1 and EN 12464-2. It also specifies data that are commonly used for lighting of indoor and outdoor work places. When these data are provided, they should conform to this document.
An increasing number of luminaires mainly those with LED are luminaires with non-replaceable light sources. Therefore data should always be given for luminaires. For luminaires...
view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies the safety and interchangeability requirements together with the test
methods and conditions required to show compliance of non-integrated tubular LED lamps,
intended for general lighting purposes, having:
• a rated wattage up to 70 W,
• a rated voltage up to 190 V ripple free DC,
• GX16t-5 cap as listed in Table 1.
The requirements of this document relate only to type testing.
NOTE 1 Where in this document the term “lamp(s)” is used, it is understood to stand for ...
view more

    • sale 10% off
    • Standard
      35 pages
      English language
    • e-Library read for
      1 day

2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1.
2017-05-31: D156/039: to be published
2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955)
2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having:  - a rated power up to 60 W;  - a rated voltage of > 50 V a.c. up to 250 V a.c.;  - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition...view more

    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: - a rated power up to 60 W; - a rated voltage of > 50 V a.c. up to 250 V a.c.; - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition in...view more

    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      13 pages
      English language
    • e-Library read for
      1 day

2017-06-08: Final decision is to publish A1 and A11 separately the same day. A1 is identical to IEC A1.
2017-05-31: D156/039: to be published
2017-05-04: Publication on the hold pending TC 34A reply about A11 (pr=58955)
2015-11-18 - CLC/TC 34A request that A1 is published together with the European Amendment A11 (WI 58955).

    • sale 10% off
    • Amendment
      5 pages
      English language
    • e-Library read for
      1 day

This part of IEC 62707 specifies general requirements, a grid and a corresponding code for
the colour binning of white LED packages emitting incoherent, visible radiation. It applies for
LED packages.
Other parts of the IEC 62707 series covering chromaticity of coloured LED packages,
luminous flux/luminous intensity, colour rendering and forward voltage are in preparation or
under consideration.
NOTE 1 This International Standard does not apply for LED modules, LED lamps and LED luminaires...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day

This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for lamps, EN 50625-2-1, and the Technical Specification CLC/TS 50625-3-1:2014 for de-pollution - General.

    • sale 10% off
    • Technical specification
      20 pages
      English language
    • e-Library read for
      1 day

IEC 62471-5:2015 provides a risk group classification system for image projectors, and measurement conditions for optical radiation emitted by image projectors. It includes manufacturing requirements that may be required as a result of an image projector system being assigned to a particular risk group. Therefore, this part of IEC 62471 provides safety requirements for lamp systems that are intended to produce projected visible optical radiation, such as theatre projectors, data projectors and h...view more

    • sale 15% off
    • Standard
      104 pages
      English and French language

This International Standard specifies the safety and interchangeability requirements, and the
exchange operation together with the test methods and conditions required to show
compliance of double-capped LED lamps with G5 and G13 caps, intended for replacing
fluorescent lamps with the same caps, having:
– a rated power up to 125 W;
– a rated voltage of up to 250 V.
Such LED lamps are designed for replacement without requiring any internal modification of
the luminaire.
The existing lumin...
view more

    • sale 10% off
    • Standard
      32 pages
      English language
    • e-Library read for
      1 day

IEC TR 62471-3:2015(E) which is a technical report, provides guidelines for the safe use of intense pulsed light (IPL) source equipment in professional premises. It describes possible adverse incidents that may occur in respect of the use of IPL devices and recommends measures to avoid them. IEC TR 62471-3:2015 sets out the control measures recommended for the safety of recipients of IPL treatment, staff, service, maintenance personnel and others. Engineering controls which form part of the IPL ...view more

    • sale 15% off
    • Technical report
      30 pages
      English language

IEC/TR 62778:2014 brings clarification and guidance concerning the assessment of blue light hazard of all lighting products which have the main emission in the visible spectrum (380 nm to 780 nm). By optical and spectral calculations, it is shown what the photobiological safety measurements as described in IEC 62471 tell us about the product and, if this product is intended to be a component in a higher level lighting product, how this information can be transferred from the component product (e...view more

    • sale 15% off
    • Technical report
      37 pages
      English language

This International Standard specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having:
• a rated power up to 60 W;
• a rated voltage of > 50 V a.c. up to 250 V a.c.;
• a lamp cap as listed in IEC 62560.
These performance requirements are additional to the safety requirements in IEC 62560. The only feature provided ...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: - a rated power up to 60 W; - a rated voltage of > 50 V a.c. up to 250 V a.c.; - a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition in...view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This International Standard gives the rules for the international lamp coding system and covers all lamp categories, excluding vehicle lamps. Coding for the main lamp types is specified and, for the others, will follow by amendments to this standard as appropriate. The object of the international lamp coding system is - to improve communication about the different types of lamps; - to help in discussions concerning interchangeability and compatibility of products; - to create a closer relationsh...view more

    • sale 10% off
    • Amendment
      15 pages
      English language
    • e-Library read for
      1 day

IEC/TR 62493-1:2013(E) presents an overview on EMF measurement results dependent on different lamp technologies used in current luminaires. For the measurement only the test procedure with the so called Van der Hoofden head in the frequency range from 20 kHz to 10 MHz was used.

    • sale 15% off
    • Technical report
      15 pages
      English language

This specification covers material having a nominal thickness from 0,05 mm to 0,15 mm, supplied either in the form of sheets or rolls.[
]The contents of the corrigendum of August 1995 have been included in this copy.

    • sale 15% off
    • Standard
      24 pages
      English and French language

IEC 62612:2013 specifies the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having:
- a rated power up to 60 W;
- a rated voltage of > 50 V a.c. up to 250 V a.c.;
- a lamp cap as listed in IEC 62560. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition...
view more

    • sale 15% off
    • Standard
      87 pages
      English and French language

IEC/TR 62750:2012(E) applies to fluorescent lamp dimming systems. It deals with the interface of fluorescent lamps and dimming electronic controlgear. A unified framework for standardization of fluorescent lamp dimming systems and the associated parameter calculation method are described in this Technical Report.

    • sale 15% off
    • Technical report
      20 pages
      English language

IEC/TR 62732:2012(E) describes how to construct a three-digit code, representing a shorthand string combining the nominal general colour rendering index and the nominal correlated colour temperature. The contents of the corrigendum of December 2012 have been included in this copy.

    • sale 15% off
    • Technical report
      6 pages
      English language

This Technical Report describes the method of measuring and specifying the centre beam intensity and the associated beam angle(s) of reflector lamps. It applies to incandescent, tungsten halogen and gas-discharge and LED based reflector lamps for general lighting purposes. It does not apply to lamps for special purposes such as projection lamps. These recommendations relate to design testing of lamps only.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      7 pages
      Slovenian language
    • e-Library read for
      1 day

This International Standard gives the rules for the international lamp coding system and covers all lamp categories, excluding vehicle lamps. Coding for the main lamp types is specified and, for the others, will follow by amendments to this standard as appropriate. The object of the international lamp coding system is - to improve communication about the different types of lamps; - to help in discussions concerning interchangeability and compatibility of products; - to create a closer relationsh...view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

IEC 61231:2010 gives the rules for the international lamp coding system and covers all lamp categories, excluding vehicle lamps. Coding for the main lamp types is specified and, for the others, will follow by amendments to this standard as appropriate. This first edition cancels and replaces the second edition of IEC 61231, published as a technical specification. It constitutes a technical revision, of which the main changes are indicated below: - introduction of LED modules (Subclause 5.8).

    • sale 15% off
    • Standard
      48 pages
      English and French language

This International Standard for electromagnetic immunity requirements applies to lighting equipment which is within the scope of IEC technical committee 34, such as lamps, auxiliaries and luminaires, intended either for connecting to a low voltage electricity supply or for battery operation. Excluded from the scope of this standard is equipment for which the immunity requirements are formulated in other IEC or CISPR standards such as: - lighting equipment for use in transport vehicles; - enterta...view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day

IEC/TR 62471-2:2009(E) provides the basis for optical radiation safety requirements of non-laser products, serving as a guide for development of safety requirements in vertical product standards and assisting lamp system manufacturers in the interpretation of safety information provided by the lamp manufacturers. This report provides guidance on:
- requirements for optical radiation safety assessment;
- allocation of safety measures;
- labelling of products.
This technical report does not ad...
view more

    • sale 15% off
    • Technical report
      45 pages
      English language

This International Standard gives guidance for evaluating the photobiological safety of lamps and lamp systems including luminaires. Specifically it specifies the exposure limits, reference measurement technique and classification scheme for the evaluation and control of photobiological hazards from all electrically powered incoherent broadband sources of optical radiation, including LEDs but excluding lasers, in the wavelength range from 200 nm through 3000 nm.

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This International Standard describes the method of measuring, evaluating and specifying the characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (1996). In this second edition, an equivalency code for the lamps is introduced. This equivalency code characterises the spectral energy dis...view more

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This International Standard describes the method of measuring, evaluating and specifying the characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This second edition cancels and replaces the first edition published in 1993 and its Amendment 1 (1996). In this second edition, an equivalency code for the lamps is introduced. This equivalency code characterises the spectral energy dis...view more

    • sale 15% off
    • Standard
      25 pages
      English and French language

IEC 61228:2020 is available as IEC 61228:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61228:2020 describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. This third edition cancels and replaces ...view more

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day