EN 60745-2-5:2007

Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws

Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for circular saws. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c.tools. This standard does not apply to saws used with abrasive wheels.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-5: Besondere Anforderungen für Kreissägen

Outils électroportatifs à moteur - Sécurité - Partie 2-5: Règles particulières pour les scies circulaires

Traite de la sécurité des outils électriques portatifs à moteur ou à entraînement magnétique, exigences spécifiques pour tous les types de scies circulaires. La tension assignée n étant pas supérieure à 250 V pour les outils monophasés alimentés en courant alternatif ou pour les outils alimentés en courant continu, et 440 V pour les outils triphasés alimentés en courant alternatif. La présente norme ne s'applique pas aux scies utilisées avec des roues abrasives.

Električna ročna orodja - Varnost - 2-5. del: Posebne zahteve za krožne žage (IEC 60745-2-5:2006, spremenjen)

Uporablja se ta klavzula prvega dela, razen kot sledi: Dodatek: Ta standard velja za vse vrste krožnih žag. V nadaljevanju se krožne žage imenujejo žage. Ta standard ne velja za žage, ki se uporabljajo z brusilnimi ploščami.

General Information

• Status: Withdrawn
• Publication Date: 22-Mar-2007
• Withdrawal Date: 31-Oct-2009
• ICS: 25.100.40 - Saws
• ICS: 25.140.20 - Electric tools
• ICS: 25.140.30 - Hand-operated tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Drafting Committee: IEC/TC 116 - Safety of hand-held motor-operated electric tools
• Parallel Committee: IEC/SC 61F - IEC_SC_61F --> TC 116
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2013
• Completion Date: 01-Oct-2013
• Directive: 98/37/EC - Machinery
• Ref Project: SIST EN 60745-2-5:2007 - Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for circular saws

Relations

• Replaces: EN 60745-2-5:2003 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
• Effective Date: 29-Jan-2023
• Replaced By: EN 60745-2-5:2010 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
• Effective Date: 29-Jan-2023
• Amended By: EN 60745-2-5:2007/A11:2009 - Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-5:2007
01-november-2007
1DGRPHãþD
SIST EN 60745-2-5:2003
SIST EN 60745-2-5:2003/OprA2:2004
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DNURåQHåDJH,(&
VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety -- Part 2-5: Particular requirements for
circular saws
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-5: Besondere
Anforderungen für Kreissägen
Outils électroportatifs à moteur - Sécurité -- Partie 2-5: Règles particulières pour les
scies circulaires
Ta slovenski standard je istoveten z: EN 60745-2-5:2007
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-5:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60745-2-5

NORME EUROPÉENNE
March 2007
EUROPÄISCHE NORM

ICS 25.140.20; 25.140.30 Supersedes EN 60745-2-5:2003


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-5: Particular requirements for circular saws
(IEC 60745-2-5:2006, modified)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-5: Règles particulières Sicherheit -
pour les scies circulaires Teil 2-5: Besondere Anforderungen
(CEI 60745-2-5:2006, modifiée) für Kreissägen
(IEC 60745-2-5:2006, modifiziert)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-5:2007 E

---------------------- Page: 2 ----------------------

EN 60745-2-5:2007 - 2 -
Foreword
The text of document 61F/643/FDIS, future edition 4 of IEC 60745-2-5, prepared by SC 61F,
Safety of hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar
electrical appliances, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by the Technical Committee CENELEC TC 61F, Safety of
hand-held and transportable motor-operated electric tools, to bring the European Standard in line
with the essential health and safety requirements of the Machinery Directive, was submitted to the
formal vote.
The combined texts were approved by CENELEC as EN 60745-2-5 on 2006-11-01.
This European Standard supersedes EN 60745-2-5:2003.
Main changes include: Clause 19: Mechanical hazards, clarifications in respect to the guarding;
editorial modifications in Annex AA, the addition of Annex M: Safety of working stands for
operation with hand-held motor-operated electric tools and editorial modifications to match with
EN 60745-1:2006.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
This standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools
(for the purpose of this standard referred to simply as tools) which could come within the
scope of this standard;
Part 2: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
This European Standard has been prepared under a mandate given to CENELEC by the
European Commission and the European Free Trade Association a
...