This document specifies the requirements and test procedures for 360° visibility of sit on self-propelled industrial variable-reach trucks (herein after referred to as trucks) without a load, with a capacity greater than 10 000 kg in accordance with ISO 5053-1 and it is intended be used in conjunction with EN 16842 1.
Where specific requirements in this part are modified from the general requirements in EN 16842 1, the requirements of this part are truck specific and to be used for sit-on self-...
view more

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and test procedures for 360° visibility of stand-on counterbalance trucks with a capacity up to and including 10 000 kg in accordance with ISO 5053 1 (herein after referred to as trucks) without a load and it is intended to be used in conjunction with EN 16842-1.
Where specific requirements in this document are modified from the general requirements in EN 16842 1, the requirements of this document are truck-specific and are to be used for stand-on counte...
view more

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the principles of design, sizing, installation, identification, commissioning and maintenance of greywater systems with the purpose of use of greywater on-site.
It applies preferably for the use of treated greywater for:
-   WC flushing;
-   garden watering;
-   laundry;
-   cleaning purposes.
This European Standard also specifies the minimum requirements for greywater systems.
Excluded from the scope of this European Standard are:
-   the use as drinking water and...
view more

    • sale 10% off
    • Standard
      30 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      31 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for electrically heated shell boilers manufactured from stainless steel specifically dedicated for generating steam for sterilizers and disinfectors.
This document covers only boilers that are heated by immersion heaters and which have a maximum allowable pressure (PS) of not greater than 6 bar, a maximum volume (V) of 1 000 litres and a product of PS ∙ V not greater than 3 000 bar ∙ l.

    • sale 10% off
    • Standard
      22 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      19 pages
      English language
    • e-Library read for
      1 day

This document gives requirements and guidance for the assessment of conformity of formulations, products and assemblies in accordance with EN 1329 1 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of third-party certification procedures.
NOTE 1   The quality management system is expected to conform to or is no less stringent than the relevant requirements to EN ISO 9001 [1].
NOTE 2   If third party certification is invol...
view more

    • sale 10% off
    • Technical specification
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      24 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies two methods for the determination of the biomass content in solid
recovered fuels: the selective dissolution and the 14C content method. The standard provides the
criteria for choosing the more appropriate method and some examples of application.

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      51 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside and from inside the duct. This European Standard is intended to be read in conjunction with EN 1363-1.
This European Standard does not examine the risk of fire spread as a result of thermal conduction along the piping ...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      26 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

This document defines the requirements for a two-components, high corrosion inhibiting epoxy primer.
The coating shall be suitable for use on suitably prepared metallic substrates, chromic acid anodised, or conversion coated aluminium alloys and other suitably prepared substrates.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for a two-components flexible polyurethane topcoat to be applied over EN 4687 and/or EN 4688 primers mainly for exterior aerospace applications.
The primer and the finish tested to this document will be from the same manufacturer applied in accordance with (i.a.w.) their instructions/Table 1.

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This European Standard establishes requirements for the management and control of operational activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This part covers the management and control of rehabilitation activities.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is d...
view more

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies a visual method of determining the amount and components of coarse foreign matter in reclaimed asphalt. A method for determining the amount and components of finer foreign matter in reclaimed asphalt is given in Annex A. This method does not completely categorise the foreign matter that can occur in asphalt.
NOTE 1   For the use of reclaimed asphalt in asphalt mixtures, it is important to know the components in the reclaimed asphalt and to what extent coarse forei...
view more

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day

This European Standard establishes the general principles for the management and control of operational activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document together with EN 14654-1 covers the management and control of inputs from users.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved ...
view more

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      28 pages
      English language
    • e-Library read for
      1 day

This document defines a methodology for determining and assessing the energy efficiency of Waste Water Treatment Plants (WWTP). The methodology aims at describing, in a systematic way, the various steps required to establish the Water Treatment Energy Index (WTEI) of a particular WWTP.
The methodology includes the classification of WWTPs in different types, identification of different stages of treatment, identification of key performance indicators (KPIs), overview of existing energy monitorin...
view more

    • sale 10% off
    • Technical report
      62 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      59 pages
      English language
    • e-Library read for
      1 day

This standard specifies a method of test for determining the natural durability of a timber against wood destroying basidiomycetes cultured on an agar medium. The method is applicable to all timber species.
NOTE This method may be used in conjunction with an ageing procedure, for example EN 73 or EN 84.

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day

This European Standard establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers general requirements for the management and control of activities.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is...
view more

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      21 pages
      English language
    • e-Library read for
      1 day

This document specifies a titrimetric method for the determination of acid value in light coloured Fatty Acid Methyl Esters, hereinafter referred as FAME.
It allows the determination of acid value within a range of 0,10 mg KOH/g to 1,00 mg KOH/g.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This European Standard establishes requirements for the management and control of activities in drain and sewer systems outside buildings and specifies requirements for development and implementation of work programmes, and the selection of techniques.
This document covers the management and control of sewer cleaning.
It is applicable to drain and sewer systems from the point where wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a w...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for the qualification of welding personnel for friction stir spot welding (FSSW) of aluminium.
In this document, the term "aluminium" refers to aluminium and its alloys.
This document does not apply to personnel exclusively performing loading or unloading of the automatic welding unit.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for the content of welding procedure specifications for the Friction Stir Spot welding (FSSW) of aluminium.
In this document, the term "aluminium" refers to aluminium and its alloys

    • sale 10% off
    • Standard
      21 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      13 pages
      English language
    • e-Library read for
      1 day

The Standard is to specify the safety requirements applicable to truck mixers. A truck mixer as defined by this standard is used for the transportation and mixing of concrete, mortars and mineral building materials. The safety requirements will cover the superstructure (mixer equipment) and its interface with the truck chassis but not cover the truck itself and the elements required for the basic transport function of the truck. Other machinery that can be combined with the truck mixer, such as ...view more

    • sale 10% off
    • Standard
      53 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      42 pages
      English language
    • e-Library read for
      1 day

This part of ISO 15616 provides minimum requirements for acceptance testing, using practical test methods, for CO2-laser beam machines for high quality welding and cutting in two dimensions (2-D), having a fixed workpiece on the platen and moving optics.
This part of ISO 15616 is not applicable to CO2-laser beam machines which use an articulated robot, nor does it apply to work stations, such as a welding positioner, fixed board cutter, etc.
This part of ISO 15616 does not cover hazard pr...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

ISO 20168:2016 specifies the dimensions and tolerances for electrode holders and of spot welding electrode caps, where a locking taper is used.

    • sale 10% off
    • Standard
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      8 pages
      English language
    • e-Library read for
      1 day

ISO 10656:2016 specifies additional requirements to those given in ISO 5826 for single-phase transformers used in AC welding. It is intended to be used in conjunction with ISO 5826, whose requirements it amends.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the dimensions and
tolerances for male electrode caps for resistance spot welding
when a female taper (see IS0 1089) is used to fix the electrode
adaptor (see IS0 5829).
It only applies to electrode caps for which the electrode force
Fmsx, given for the diameter dl, does not exceed 4,O kN.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      4 pages
      English language
    • e-Library read for
      1 day

This document defines friction stir spot welding (FSSW) process terms and definitions.
In this document, the term "aluminium" refers to aluminium and its alloys.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      15 pages
      English language
    • e-Library read for
      1 day

Specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a female taper (male electrode cap, see ISO 5830) and for which the electrode taper fits conform to ISO 1089. Covers also designation, material and marking.

    • sale 10% off
    • Standard
      7 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      4 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the requirements of the geometrical and mechanical characteristics of
pneumatic cylinders used for multiple spot welding machines and their manufacturing, delivery and test
specifications.
These cylinders for a nominal air pressure of 1 MPa (10 bar) are double-acting, with two Piston stages in
series for the advance during the operational stroke and the forte, and a Single Piston Stage for the return.

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      33 pages
      English language
    • e-Library read for
      1 day

This Technical Reports describes quality designations and indications for algae and directly derived products from algae production required for or by pharma producers and industry. It does not apply to Food and Feed sectors.
Note: This TRs does not provide instructions on existing handling of technical requirements in existing legislations.

    • sale 10% off
    • Technical report
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies a method to determine the capability of a manufacturer to use friction stir spot welding (FSSW) for production of products of the specified quality.
It specifies quality requirements, but does not assign those requirements to any specific product group.
In this document, the term "aluminium" refers to aluminium and its alloys.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      16 pages
      English language
    • e-Library read for
      1 day

This draft European Standard specifies product characteristics for thermoplastics rigid protective wallcovering panels whose purposes are decorative and protective, but non-structural.
The products covered by this draft European Standard are intended to be used as finishes for hanging onto internal walls and wall partitions by means of adhesive.
For the specified characteristics of these products, this draft European Standard provides for each of it corresponding: requirement(s), assessment me...
view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      27 pages
      English language
    • e-Library read for
      1 day

This document provides the requirements for the tests made on welded thermoplastics semi-finished products.
The selection of the appropriate test method(s) should be made in accordance with the particular type and application of welded product.
The test results depend on the conditions of manufacture for the test specimen and on the test conditions. They can therefore only be related to the behaviour of the product or can only be used for designing a structure, if the test conditions can be re...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short term tensile welding factor.
A tensile test may be used in conjunction with other tests (e.g. bend, tensile creep, macro) to assess the performance of welded assemblies, made from thermoplastics materials.
The test is applicable to welded assemblies made from thermoplastics materials filled or unfilled, but not ...
view more

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      14 pages
      English language
    • e-Library read for
      1 day

This document describes a method for defining requirements and assuring component integrity for plastic parts created using material extrusion based additive manufacturing processes. It covers the process, equipment and operational parameters. Processes include all material extrusion based additive manufacturing processes.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      11 pages
      English language
    • e-Library read for
      1 day

This document specifies the design requirements and provides design guidelines for friction stir spot welding.
In this document, the term "aluminium" refers to aluminium and its alloys.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      9 pages
      English language
    • e-Library read for
      1 day

This Technical Reports describes quality designations and indications for algae and directly derived products from algae production required for or by cosmetics producers and industry. It does not apply to Food and Feed sectors.
Note: This TRs does not provide instructions on existing handling of technical requirements in existing legislations

    • sale 10% off
    • Technical report
      41 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical report
      44 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      21 pages
      English language
    • e-Library read for
      1 day

This Technical Specification specifies the requirements of materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This Technical Specification does not deal with adhesion materials, for example:
- sand
- adhesion enhancers

    • sale 10% off
    • Technical specification
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      41 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements for two types of hose assemblies (Types D and SD) and four grades based on electrical properties with hoses made of rubber or thermoplastics and hose fittings made of metal designed to convey liquid or gaseous chemical substances, hereinafter termed the “chemicals conveyed”.
The hose assemblies are intended for use with chemicals conveyed in the temperature range of –20 °C to +65 °C at a working pressure ≤ 10 bar1).
NOTE 1 This document sets out requirement...
view more

    • sale 10% off
    • Standard
      47 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      48 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      4 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      23 pages
      English language
    • e-Library read for
      1 day

This document specifies the material, mechanical and functional (fitness for purpose) requirements for warning devices with visual characteristics manufactured from plastics, intended to indicate the presence of cables and piping systems buried in ground when opening trenches and more generally during digging work.
This document also specifies the test methods referred to in this document.
This document is applicable to two types of visual warning devices: tapes (type 1) and meshes (type 2).

    • sale 10% off
    • Standard
      20 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      22 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the requirements when applying material to the active interface between the wheel tread and the crown of the rail and includes trainborne and track side equipment.
This technical specification only covers the equipment and application of material to the active interface.
This document defines:
- the characteristics that systems of top of rail equipment for wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried ou...
view more

    • sale 10% off
    • Technical specification
      24 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Technical specification
      25 pages
      English language
    • e-Library read for
      1 day

ISO 17172:2014 specifies the test method for determining the extent to which granulated or ungranulated ceramic powders are compacted, when subjected to uniaxial compressive loading in a confining die, under specified conditions.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      12 pages
      English language
    • e-Library read for
      1 day

N/A

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      25 pages
      German language
    • e-Library read for
      1 day

ISO 18610:2016 specifies an ultrasonic method to determine the components of the elasticity tensor of ceramic matrix composite materials at room temperature. Young's moduli shear moduli and Poisson coefficients, can be determined from the components of the elasticity tensor.
It applies to ceramic matrix composites with a continuous fibre reinforcement: unidirectional (1D), bidirectional (2D), and tridirectional (×D, with 2 < × ≤ 3) which have at least orthotropic symmetry, and whose material sy...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      24 pages
      English language
    • e-Library read for
      1 day