EN 61029-2-4:2011

Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders

Applies to bench grinders with a wheel diameter not exceeding 200 mm and a peripheral speed not exceeding 50 m/s.

Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-4: Besondere Anforderungen für Tischschleifmaschinen

Sécurité des machines-outils électriques semi-fixes - Partie 2-4: Règles particulières pour les tourets à meuler

S'applique aux tourets à meuler dont la meule a un diamètre maximal de 200 mm et une vitesse circonférentielle maximale de 50 m/s.

Varnost premičnih električnih orodij - 2-4. del: Posebne zahteve za namizne brusilnike (IEC 61029-2-4:1993, spremenjen + A1:2001, spremenjen)

Ta mednarodni standard velja za premične namizne brusilnike s premerom kolesa, ki ne presega 200 mm, in s periferno hitrostjo, ki ne presega 50 m/s, kot je določeno v 2.101.

General Information

• Status: Withdrawn
• Publication Date: 27-Jan-2011
• Withdrawal Date: 09-Jan-2014
• ICS: 25.080.50 - Grinding and polishing machines
• ICS: 25.140.20 - Electric tools
• Technical Committee: CLC/TC 116 - Safety of hand-held motor-operated electric tools
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Jun-2020
• Completion Date: 24-Jun-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 61029-2-4:2011 - Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993, modified + A1:2001, modified)

Relations

• Replaces: EN 61029-2-4:2003 - Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
• Effective Date: 29-Jan-2023
• Replaces: EN 61029-2-4:2003/A1:2003 - Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders
• Effective Date: 29-Jan-2023
• Replaced By: EN 62841-3-4:2016 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61029-2-4:2011
01-april-2011
1DGRPHãþD
SIST EN 61029-2-4:2003
SIST EN 61029-2-4:2003/A1:2004
9DUQRVWSUHPLþQLKHOHNWULþQLKRURGLMGHO3RVHEQH]DKWHYH]DQDPL]QH
EUXVLOQLNH,(&VSUHPHQMHQ$VSUHPHQMHQ
Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements
for bench grinders (IEC 61029-2-4:1993, modified + A1:2001, modified)
Sicherheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-4: Besondere
Anforderungen für Tischschleifmaschinen (IEC 61029-2-4:1993, modifiziert + A1:2001,
modifiziert)
Sécurité des machines-outils électriques semi-fixes - Partie 2-4: Règles particulières
pour les tourets à meuler (CEI 61029-2-4:1993, modifiée + A1:2001, modifiée)
Ta slovenski standard je istoveten z: EN 61029-2-4:2011
ICS:
25.080.50 Brusilni in polirni stroji Grinding and polishing
machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 61029-2-4:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61029-2-4:2011

---------------------- Page: 2 ----------------------

SIST EN 61029-2-4:2011

EUROPEAN STANDARD
EN 61029-2-4

NORME EUROPÉENNE
January 2011
EUROPÄISCHE NORM

ICS 25.140.20; 25.080.50 Supersedes EN 61029-2-4:2003 + corr. Apr.2003 + A1:2003


English version


Safety of transportable motor-operated electric tools -
Part 2-4: Particular requirements for bench grinders
(IEC 61029-2-4:1993, modified + A1:2001, modified)


Sécurité des machines-outils Sicherheit transportabler
électriques semi-fixes - motorbetriebener Elektrowerkzeuge -
Partie 2-4: Règles particulières pour les Teil 2-4: Besondere Anforderungen für
tourets à meuler Tischschleifmaschinen
(CEI 61029-2-4:1993, modifiée + (IEC 61029-2-4:1993, modifiziert +
A1:2001, modifiée) A1:2001, modifiziert)




This European Standard was approved by CENELEC on 2011-01-10. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61029-2-4:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61029-2-4:2011
EN 61029-2-4:2011 – 2 –

Foreword
The text of the International Standard IEC 61029-2-4:1993 + A1:2001, prepared by
IEC TC 116, Safety of hand-held motor-operated electric tools, together with the common
modifications prepared by the Technical Committee CENELEC TC 116, Safety of motor-
operated electric tools, was submitted to the formal vote and was approved by CENELEC as
EN 61029-2-4 on 2011-01-10.
This document supersedes EN 61029-2-4:2003 + corrigendum April 2003 + A1:2003.
The following dates were fixed:
– latest date by which the EN has to be implemented

at national level by publication of an identical

national standard or by endorsement
(dop) 2012-01-10

– latest date by which the national standards conflicting

with the EN have to be withdrawn
(dow) 2014-01-10
In this document, the common modifications to the International Standard are indicated by a
vertical line in the left margin of the text.
This European Standard is divided into two parts:
Part 1 General requirements which are common to most transportable electric motor operated
tools (for the purpose of this standard referred to simply as tools) which could come
within the scope of this standard;
Part 2 Requirements for particular types of tool which either supplement or modify the
requirements given in part 1 to account for the particular hazards and characteristics of
these specific tools.
This European Standard has been prepared u
...